RecidivCI

Details for run #8834 (ok)

libc-malloc (d75ad774a)

Mon Aug 31 22:46:24 UTC 2020

@cd /home/ubuntu/ci/redis

Working dir is now '/home/ubuntu/ci/redis'

@git checkout unstable

Already on 'unstable'
Your branch is up to date with 'origin/unstable'.

@git pull origin unstable

From https://github.com/antirez/redis
 * branch                unstable   -> FETCH_HEAD
Already up to date.

@make distclean

cd src && make distclean
make[1]: Entering directory '/home/ubuntu/ci/redis/src'
/bin/sh: 1: pkg-config: not found
rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep dict-benchmark
rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d scripting.d bio.d rio.d rand.d memtest.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d gopher.d tracking.d connection.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d siphash.d monotonic.d
(cd ../deps && make distclean)
make[2]: Entering directory '/home/ubuntu/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(cd hdr_histogram && make clean) > /dev/null || true
(rm -f .make-*)
make[2]: Leaving directory '/home/ubuntu/ci/redis/deps'
(rm -f .make-*)
make[1]: Leaving directory '/home/ubuntu/ci/redis/src'

@make MALLOC=libc -j 8

cd src && make all
make[1]: Entering directory '/home/ubuntu/ci/redis/src'
/bin/sh: 1: pkg-config: not found
    CC Makefile.dep
/bin/sh: 1: pkg-config: not found
rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep dict-benchmark
rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d scripting.d bio.d rio.d rand.d memtest.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d gopher.d tracking.d connection.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d siphash.d monotonic.d
(cd ../deps && make distclean)
make[2]: Entering directory '/home/ubuntu/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(cd hdr_histogram && make clean) > /dev/null || true
(rm -f .make-*)
make[2]: Leaving directory '/home/ubuntu/ci/redis/deps'
(rm -f .make-*)
echo STD=-std=c11 -pedantic -DREDIS_STATIC='' >> .make-settings
echo WARN=-Wall -W -Wno-missing-field-initializers >> .make-settings
echo OPT=-O2 >> .make-settings
echo MALLOC=libc >> .make-settings
echo CFLAGS= >> .make-settings
echo LDFLAGS= >> .make-settings
echo REDIS_CFLAGS= >> .make-settings
echo REDIS_LDFLAGS= >> .make-settings
echo PREV_FINAL_CFLAGS=-std=c11 -pedantic -DREDIS_STATIC='' -Wall -W -Wno-missing-field-initializers -O2 -g -ggdb   -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram >> .make-settings
echo PREV_FINAL_LDFLAGS=  -g -ggdb -rdynamic >> .make-settings
(cd ../deps && make hiredis linenoise lua hdr_histogram)
make[2]: Entering directory '/home/ubuntu/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(cd hdr_histogram && make clean) > /dev/null || true
(rm -f .make-*)
(echo "" > .make-cflags)
(echo "" > .make-ldflags)
MAKE hiredis
MAKE linenoise
MAKE lua
cd hiredis && make static 
cd linenoise && make
cd lua/src && make all CFLAGS="-O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' " MYLDFLAGS="" AR="ar rcu"
MAKE hdr_histogram
cd hdr_histogram && make
make[3]: Entering directory '/home/ubuntu/ci/redis/deps/hiredis'
make[3]: Entering directory '/home/ubuntu/ci/redis/deps/linenoise'
cc  -Wall -Os -g  -c linenoise.c
make[3]: Entering directory '/home/ubuntu/ci/redis/deps/hdr_histogram'
cc  -Wall -Os -g  -c  hdr_histogram.c 
make[3]: Entering directory '/home/ubuntu/ci/redis/deps/lua/src'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lapi.o lapi.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lcode.o lcode.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ldebug.o ldebug.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb alloc.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ldo.o ldo.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb net.c
ldo.c: In function ‘f_parser’:
ldo.c:496:7: warning: unused variable ‘c’ [-Wunused-variable]
  496 |   int c = luaZ_lookahead(p->z);
      |       ^
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb hiredis.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ldump.o ldump.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lfunc.o lfunc.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb sds.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb async.c
make[3]: Leaving directory '/home/ubuntu/ci/redis/deps/hdr_histogram'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lgc.o lgc.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o llex.o llex.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lmem.o lmem.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lobject.o lobject.c
make[3]: Leaving directory '/home/ubuntu/ci/redis/deps/linenoise'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lopcodes.o lopcodes.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lparser.o lparser.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lstate.o lstate.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lstring.o lstring.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ltable.o ltable.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ltm.o ltm.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb read.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lundump.o lundump.c
cc -std=c99 -pedantic -c -O3 -fPIC   -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb sockcompat.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lvm.o lvm.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lzio.o lzio.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o strbuf.o strbuf.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o fpconv.o fpconv.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lauxlib.o lauxlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lbaselib.o lbaselib.c
lauxlib.c: In function ‘luaL_loadfile’:
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ldblib.o ldblib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o liolib.o liolib.c
lauxlib.c:577:4: warning: this ‘while’ clause does not guard... [-Wmisleading-indentation]
  577 |    while ((c = getc(lf.f)) != EOF && c != LUA_SIGNATURE[0]) ;
      |    ^~~~~
lauxlib.c:578:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘while’
  578 |     lf.extraline = 0;
      |     ^~
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lmathlib.o lmathlib.c
ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o loslib.o loslib.c
make[3]: Leaving directory '/home/ubuntu/ci/redis/deps/hiredis'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o ltablib.o ltablib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lstrlib.o lstrlib.c
ltablib.c: In function ‘addfield’:
ltablib.c:137:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
  137 |   if (!lua_isstring(L, -1))
      |   ^~
ltablib.c:140:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
  140 |     luaL_addvalue(b);
      |     ^~~~~~~~~~~~~
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o loadlib.o loadlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o linit.o linit.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lua_cjson.o lua_cjson.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lua_struct.o lua_struct.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lua_cmsgpack.o lua_cmsgpack.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lua_bit.o lua_bit.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o lua.o lua.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o luac.o luac.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC=''    -c -o print.o print.c
ar rcu liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o	# DLL needs all object files
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib liblua.a
cc -o lua  lua.o liblua.a -lm 
cc -o luac  luac.o print.o liblua.a -lm 
/usr/bin/ld: liblua.a(loslib.o): in function `os_tmpname':
loslib.c:(.text+0x2b5): warning: the use of `tmpnam' is dangerous, better use `mkstemp'
make[3]: Leaving directory '/home/ubuntu/ci/redis/deps/lua/src'
make[2]: Leaving directory '/home/ubuntu/ci/redis/deps'
    CC adlist.o
    CC quicklist.o
    CC ae.o
    CC anet.o
    CC dict.o
    CC server.o
    CC sds.o
    CC zmalloc.o
    CC lzf_c.o
    CC lzf_d.o
    CC pqsort.o
    CC zipmap.o
    CC sha1.o
    CC ziplist.o
    CC release.o
    CC networking.o
    CC util.o
    CC object.o
    CC db.o
    CC replication.o
    CC rdb.o
    CC t_string.o
    CC t_list.o
    CC t_set.o
    CC t_zset.o
    CC t_hash.o
    CC config.o
    CC aof.o
    CC pubsub.o
    CC multi.o
    CC debug.o
    CC sort.o
    CC intset.o
    CC syncio.o
    CC cluster.o
    CC crc16.o
    CC endianconv.o
    CC slowlog.o
    CC scripting.o
    CC bio.o
    CC rio.o
    CC rand.o
    CC memtest.o
    CC crcspeed.o
    CC crc64.o
    CC bitops.o
    CC sentinel.o
    CC notify.o
    CC setproctitle.o
    CC blocked.o
    CC hyperloglog.o
    CC latency.o
    CC sparkline.o
    CC redis-check-rdb.o
    CC redis-check-aof.o
    CC geo.o
    CC lazyfree.o
    CC module.o
    CC evict.o
    CC expire.o
    CC geohash.o
    CC geohash_helper.o
    CC childinfo.o
    CC defrag.o
    CC siphash.o
    CC rax.o
    CC t_stream.o
    CC listpack.o
    CC localtime.o
    CC lolwut.o
    CC lolwut5.o
    CC lolwut6.o
    CC acl.o
    CC gopher.o
    CC tracking.o
    CC connection.o
    CC tls.o
    CC sha256.o
    CC timeout.o
    CC setcpuaffinity.o
    CC monotonic.o
    CC redis-cli.o
    CC redis-benchmark.o
    LINK redis-server
    LINK redis-benchmark
    INSTALL redis-sentinel
    INSTALL redis-check-rdb
    INSTALL redis-check-aof
    LINK redis-cli

Hint: It's a good idea to run 'make test' ;)

make[1]: Leaving directory '/home/ubuntu/ci/redis/src'

@./runtest

Cleanup: may take some time... OK
Starting test server at port 11111
[ready]: 3458350
Testing unit/printver
[ready]: 3458348
Testing unit/dump
[ready]: 3458349
Testing unit/auth
[ready]: 3458351
Testing unit/protocol
[ready]: 3458352
Testing unit/keyspace
[ready]: 3458353
Testing unit/scan
[ready]: 3458354
Testing unit/type/string
[ready]: 3458355
Testing unit/type/incr
[ready]: 3458356
Testing unit/type/list
[ready]: 3458357
Testing unit/type/list-2
[ready]: 3458358
Testing unit/type/list-3
[ready]: 3458359
Testing unit/type/set
[ready]: 3458360
Testing unit/type/zset
[ready]: 3458361
Testing unit/type/hash
[ready]: 3458362
Testing unit/type/stream
[ready]: 3458363
Testing unit/type/stream-cgroups
[ok]: Explicit regression for a list bug
[ok]: SET and GET an item
[ok]: SET and GET an empty item
[ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - regular set
[ok]: LPOS basic usage
[ok]: INCR against non existing key
[ok]: LPOS RANK (positive and negative rank) option
[ok]: INCR against key created by incr itself
[ok]: INCR against key originally set with SET
[ok]: INCR over 32bit value
[ok]: LPOS COUNT option
[ok]: INCRBY over 32bit value with over 32bit increment
[ok]: LPOS COUNT + RANK option
[ok]: LPOS non existing key
[ok]: LPOS no match
[ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset
[ok]: INCR fails against key with spaces (left)
[ok]: LPOS MAXLEN
[ok]: INCR fails against key with spaces (right)
[ok]: LPOS when RANK is greater than matches
[ok]: INCR fails against key with spaces (both)
[ok]: SMISMEMBER against non set
[ok]: Check encoding - ziplist
[ok]: SMISMEMBER non existing key
[ok]: INCR fails against a key holding a list
[ok]: DECRBY over 32bit value with over 32bit increment, negative res
[ok]: SMISMEMBER requires one or more members
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - ziplist
[ok]: SADD against non set
[ok]: ZSET basic ZADD and score update - ziplist
[ok]: INCR uses shared objects in the 0-9999 range
[ok]: ZSET element can't be set to NaN with ZADD - ziplist
[ok]: ZSET element can't be set to NaN with ZINCRBY
[ok]: SADD a non-integer against an intset
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - regular list
[ok]: R/LPOP against empty list
[ok]: INCR can modify objects in-place
[ok]: Variadic RPUSH/LPUSH
[ok]: XADD can add entries into a stream that XRANGE can fetch
[ok]: ZADD with options syntax error with incomplete pair
[ok]: INCRBYFLOAT against non existing key
[ok]: ZADD XX option without key - ziplist
[ok]: XADD IDs are incremental
[ok]: DEL a list
[ok]: XADD IDs are incremental when ms is the same as well
[ok]: INCRBYFLOAT against key originally set with SET
[ok]: SADD an integer larger than 64 bits
[ok]: BLPOP, BRPOP: single existing list - linkedlist
[ok]: XADD IDs correctly report an error when overflowing
[ok]: BLPOP, BRPOP: multiple existing lists - linkedlist
[ok]: INCRBYFLOAT over 32bit value
[ok]: ZADD XX existing key - ziplist
[ok]: INCRBYFLOAT over 32bit value with over 32bit increment
[ok]: ZADD XX returns the number of elements actually added
[ok]: BLPOP, BRPOP: second list has an entry - linkedlist
[ok]: INCRBYFLOAT fails against key with spaces (left)
[ok]: INCRBYFLOAT fails against key with spaces (right)
[ok]: ZADD XX updates existing elements score
[ok]: BRPOPLPUSH - linkedlist
[ok]: INCRBYFLOAT fails against key with spaces (both)
[ok]: ZADD XX and NX are not compatible
[ok]: ZADD NX with non existing key
[ok]: INCRBYFLOAT fails against a key holding a list
[ok]: BLPOP, BRPOP: single existing list - ziplist
[ok]: INCRBYFLOAT does not allow NaN or Infinity
[ok]: INCRBYFLOAT decrement
[ok]: ZADD NX only add new elements without updating old ones
[ok]: BLPOP, BRPOP: multiple existing lists - ziplist
[ok]: string to double with null terminator
[ok]: ZADD INCR works like ZINCRBY
[ok]: BLPOP, BRPOP: second list has an entry - ziplist
[ok]: BRPOPLPUSH - ziplist
[ok]: BLPOP, LPUSH + DEL should not awake blocked client
[ok]: ZADD INCR works with a single score-elemenet pair
[ok]: No negative zero
[ok]: ZADD CH option changes return value to all changed elements
[ok]: ZINCRBY calls leading to NaN result in error
[ok]: ZADD - Variadic version base case
[ok]: ZADD - Return value is the number of actually added items
[ok]: ZADD - Variadic version does not add nothing on single parsing err
[ok]: ZADD - Variadic version will raise error on missing arg
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation
[ok]: ZCARD basics - ziplist
[ok]: HSET/HLEN - Small hash creation
[ok]: ZREM removes key after last element is removed
[ok]: Is the small hash encoded with a ziplist?
[ok]: ZREM variadic version
[ok]: ZREM variadic version -- remove elements after key deletion
[ok]: Handle an empty query
[ok]: ZRANGE basics - ziplist
[ok]: Negative multibulk length
[ok]: ZREVRANGE basics - ziplist
[ok]: AUTH fails if there is no password configured server side
[ok]: Out of range multibulk length
[ok]: ZRANK/ZREVRANK basics - ziplist
[ok]: Wrong multibulk payload header
[ok]: ZRANK - after deletion - ziplist
[ok]: Negative multibulk payload length
[ok]: ZINCRBY - can create a new sorted set - ziplist
[ok]: Out of range multibulk payload length
[ok]: ZINCRBY - increment and decrement - ziplist
[ok]: Non-number multibulk payload length
[ok]: ZINCRBY return value
[ok]: Multi bulk request not followed by bulk arguments
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics
[ok]: Generic wrong number of args
[ok]: Unbalanced number of quotes
[ok]: DUMP / RESTORE are able to serialize / unserialize a simple key
[ok]: RESTORE can set an arbitrary expire to the materialized key
[ok]: RESTORE can set an expire that overflows a 32 bit integer
[ok]: RESTORE can set an absolute expire
[ok]: RESTORE with ABSTTL in the past
[ok]: RESTORE can set LRU
[ok]: RESTORE can set LFU
[ok]: RESTORE returns an error of the key already exists
[ok]: RESTORE can overwrite an existing key with REPLACE
[ok]: RESTORE can detect a syntax error for unrecongized options
[ok]: DUMP of non existing key returns nil
[ok]: SCAN basic
[ok]: DEL against a single item
[ok]: Vararg DEL
[ok]: KEYS with pattern
[ok]: KEYS to get all keys
[ok]: DBSIZE
[ok]: DEL all keys
[ok]: SADD overflows the maximum allowed integers in an intset
[ok]: Variadic SADD
[ok]: ZRANGEBYSCORE with WITHSCORES
[ok]: ZRANGEBYSCORE with LIMIT
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES
[ok]: ZRANGEBYSCORE with non-value min or max
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics
[ok]: ZLEXCOUNT advanced
[ok]: ZRANGEBYSLEX with LIMIT
[ok]: ZRANGEBYLEX with invalid lex range specifiers
[ok]: ZREMRANGEBYSCORE basics
[ok]: ZREMRANGEBYSCORE with non-value min or max
[ok]: ZREMRANGEBYRANK basics
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - ziplist
[ok]: ZUNIONSTORE with empty set - ziplist
[ok]: ZUNIONSTORE basics - ziplist
[ok]: ZUNIONSTORE with weights - ziplist
[ok]: ZUNIONSTORE with a regular set and weights - ziplist
[ok]: ZUNIONSTORE with AGGREGATE MIN - ziplist
[ok]: ZUNIONSTORE with AGGREGATE MAX - ziplist
[ok]: ZINTERSTORE basics - ziplist
[ok]: ZINTERSTORE with weights - ziplist
[ok]: ZINTERSTORE with a regular set and weights - ziplist
[ok]: ZINTERSTORE with AGGREGATE MIN - ziplist
[ok]: ZINTERSTORE with AGGREGATE MAX - ziplist
[ok]: XGROUP CREATE: creation and duplicate group name detection
[ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM
[ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM
[ok]: XREADGROUP will return only new elements
[ok]: ZUNIONSTORE with +inf/-inf scores - ziplist
[ok]: ZUNIONSTORE with NaN weights ziplist
[ok]: XREADGROUP can read the history of the elements we own
[ok]: XPENDING is able to return pending items
[ok]: XPENDING can return single consumer items
[ok]: ZINTERSTORE with +inf/-inf scores - ziplist
[ok]: ZINTERSTORE with NaN weights ziplist
[ok]: XACK is able to remove items from the client/group PEL
[ok]: XACK can't remove the same item multiple times
[ok]: XACK is able to accept multiple arguments
[ok]: Basic ZPOP with a single key - ziplist
[ok]: XACK should fail if got at least one invalid ID
[ok]: ZPOP with count - ziplist
[ok]: PEL NACK reassignment after XGROUP SETID event
[ok]: BZPOP with a single existing sorted set - ziplist
[ok]: XREADGROUP will not report data on empty history. Bug #5577
[ok]: XREADGROUP history reporting of deleted entries. Bug #5570
[ok]: BZPOP with multiple existing sorted sets - ziplist
[ok]: BZPOP second sorted set has members - ziplist
[ok]: Check encoding - skiplist
[ok]: ZSET basic ZADD and score update - skiplist
[ok]: ZSET element can't be set to NaN with ZADD - skiplist
[ok]: ZSET element can't be set to NaN with ZINCRBY
[ok]: ZADD with options syntax error with incomplete pair
[ok]: ZADD XX option without key - skiplist
[ok]: ZADD XX existing key - skiplist
[ok]: ZADD XX returns the number of elements actually added
[ok]: ZADD XX updates existing elements score
[ok]: ZADD XX and NX are not compatible
[ok]: ZADD NX with non existing key
[ok]: ZADD NX only add new elements without updating old ones
[ok]: SCAN COUNT
Testing Redis version 999.999.999 (d75ad774)
[ok]: ZADD INCR works like ZINCRBY
[ok]: ZADD INCR works with a single score-elemenet pair
[ok]: ZADD CH option changes return value to all changed elements
[ok]: ZINCRBY calls leading to NaN result in error
[ok]: ZADD - Variadic version base case
[ok]: ZADD - Return value is the number of actually added items
[ok]: ZADD - Variadic version does not add nothing on single parsing err
[ok]: ZADD - Variadic version will raise error on missing arg
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation
[ok]: ZCARD basics - skiplist
[ok]: ZREM removes key after last element is removed
[ok]: ZREM variadic version
[ok]: ZREM variadic version -- remove elements after key deletion
[ok]: ZRANGE basics - skiplist
[ok]: ZREVRANGE basics - skiplist
[ok]: ZRANK/ZREVRANK basics - skiplist
[ok]: ZRANK - after deletion - skiplist
[ok]: ZINCRBY - can create a new sorted set - skiplist
[ok]: ZINCRBY - increment and decrement - skiplist
[ok]: ZINCRBY return value
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics
[ok]: ZRANGEBYSCORE with WITHSCORES
[ok]: ZRANGEBYSCORE with LIMIT
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES
[ok]: ZRANGEBYSCORE with non-value min or max
[ok]: SCAN MATCH
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics
[ok]: ZLEXCOUNT advanced
[ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client
[ok]: BLPOP with same key multiple times should work (issue #801)
[ok]: MULTI/EXEC is isolated from the point of view of BLPOP
[ok]: BLPOP with variadic LPUSH
[ok]: ZRANGEBYSLEX with LIMIT
[ok]: ZRANGEBYLEX with invalid lex range specifiers
[ok]: Regression for quicklist #3343 bug
[ok]: ZREMRANGEBYSCORE basics
[ok]: ZREMRANGEBYSCORE with non-value min or max
[ok]: ZREMRANGEBYRANK basics
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist
[ok]: ZUNIONSTORE with empty set - skiplist
[ok]: ZUNIONSTORE basics - skiplist
[ok]: ZUNIONSTORE with weights - skiplist
[ok]: ZUNIONSTORE with a regular set and weights - skiplist
[ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist
[ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist
[ok]: ZINTERSTORE basics - skiplist
[ok]: ZINTERSTORE with weights - skiplist
[ok]: ZINTERSTORE with a regular set and weights - skiplist
[ok]: ZINTERSTORE with AGGREGATE MIN - skiplist
[ok]: ZINTERSTORE with AGGREGATE MAX - skiplist
[ok]: ZUNIONSTORE with +inf/-inf scores - skiplist
[ok]: ZUNIONSTORE with NaN weights skiplist
[ok]: ZINTERSTORE with +inf/-inf scores - skiplist
[ok]: ZINTERSTORE with NaN weights skiplist
[ok]: Basic ZPOP with a single key - skiplist
[ok]: ZPOP with count - skiplist
[ok]: BZPOP with a single existing sorted set - skiplist
[ok]: BZPOP with multiple existing sorted sets - skiplist
[ok]: BZPOP second sorted set has members - skiplist
[ok]: ZINTERSTORE regression with two sets, intset+hashtable
[ok]: ZUNIONSTORE regression, should not create NaN in scores
[ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets
[ok]: Very big payload in GET/SET
[ok]: XADD with MAXLEN option
[ok]: SCAN TYPE
[ok]: SSCAN with encoding intset
[ok]: Blocking XREADGROUP will not reply with an empty array
[ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP
[ok]: SSCAN with encoding hashtable
[ok]: RENAME can unblock XREADGROUP with data
[ok]: RENAME can unblock XREADGROUP with -NOGROUP
[ok]: HSCAN with encoding ziplist
[ok]: HSET/HLEN - Big hash creation
[ok]: Is the big hash encoded with an hash table?
[ok]: HGET against the small hash
[ok]: Set encoding after DEBUG RELOAD
[ok]: SREM basics - regular set
[ok]: SREM basics - intset
[ok]: SREM with multiple arguments
[ok]: AUTH fails when a wrong password is given
[ok]: SREM variadic version with more args needed to destroy the key
[ok]: Arbitrary command gives an error when AUTH is required
[ok]: AUTH succeeds when the right password is given
[ok]: Once AUTH succeeded we can actually send commands to the server
[1/57 done]: unit/type/incr (0 seconds)
Testing unit/sort
[ok]: Protocol desync regression test #1
[ok]: ZUNIONSTORE result is sorted
[2/57 done]: unit/printver (0 seconds)
Testing unit/expire
[ok]: MIGRATE is caching connections
[ok]: ZMSCORE retrieve
[ok]: ZMSCORE retrieve from empty set
[ok]: ZMSCORE retrieve with missing member
[ok]: ZMSCORE retrieve single member
[ok]: ZMSCORE retrieve requires one or more members
[ok]: ZSET commands don't accept the empty strings as valid score
[ok]: Generated sets must be encoded as hashtable
[ok]: SINTER with two sets - hashtable
[ok]: SINTERSTORE with two sets - hashtable
[ok]: HSCAN with encoding hashtable
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - hashtable
[ok]: ZSCAN with encoding ziplist
[ok]: HGET against the big hash
[ok]: HGET against non existing key
[ok]: HSET in update and insert mode
[ok]: HSETNX target key missing - small hash
[ok]: HSETNX target key exists - small hash
[ok]: HSETNX target key missing - big hash
[ok]: HSETNX target key exists - big hash
[ok]: HMSET wrong number of args
[ok]: HMSET - small hash
[ok]: SUNION with two sets - hashtable
[ok]: ZSCORE - ziplist
[ok]: SUNIONSTORE with two sets - hashtable
[ok]: SINTER against three sets - hashtable
[ok]: SINTERSTORE with three sets - hashtable
[ok]: Old Ziplist: SORT BY key
[ok]: Old Ziplist: SORT BY key with limit
[ok]: Old Ziplist: SORT BY hash field
[ok]: SUNION with non existing keys - hashtable
[ok]: SDIFF with two sets - hashtable
[ok]: SDIFF with three sets - hashtable
[ok]: SDIFFSTORE with three sets - hashtable
[ok]: ZMSCORE - ziplist
[ok]: EXPIRE - set timeouts multiple times
[ok]: EXPIRE - It should be still possible to read 'x'
[ok]: HMSET - big hash
[ok]: HMGET against non existing key and fields
[ok]: HMGET against wrong type
[ok]: HMGET - small hash
[ok]: ZSCAN with encoding skiplist
[3/57 done]: unit/auth (0 seconds)
Testing unit/other
[ok]: ZSCORE after a DEBUG RELOAD - ziplist
[ok]: Generated sets must be encoded as intset
[ok]: SINTER with two sets - intset
[ok]: SINTERSTORE with two sets - intset
[ok]: SCAN guarantees check under write load
[ok]: SSCAN with integer encoded object (issue #1345)
[ok]: SSCAN with PATTERN
[ok]: HSCAN with PATTERN
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset
[ok]: ZSCAN with PATTERN
[ok]: SUNION with two sets - intset
[ok]: Protocol desync regression test #2
[ok]: SUNIONSTORE with two sets - intset
[ok]: HMGET - big hash
[ok]: HKEYS - small hash
[ok]: SINTER against three sets - intset
[ok]: SINTERSTORE with three sets - intset
[ok]: SUNION with non existing keys - intset
[ok]: SDIFF with two sets - intset
[ok]: SDIFF with three sets - intset
[ok]: SDIFFSTORE with three sets - intset
[ok]: SDIFF with first set empty
[ok]: SDIFF with same set two times
[ok]: HKEYS - big hash
[ok]: HVALS - small hash
[ok]: ZSCAN scores: regression test for issue #2175
[ok]: ZSET sorting stresser - ziplist
[ok]: HVALS - big hash
[ok]: HGETALL - small hash
[ok]: SAVE - make sure there are all the types as values
[ok]: Protocol desync regression test #3
[ok]: HGETALL - big hash
[ok]: HDEL and return value
[ok]: HDEL - more than a single value
[ok]: HDEL - hash becomes empty before deleting all specified fields
[ok]: HEXISTS
[ok]: Is a ziplist encoded Hash promoted on big payload?
[ok]: HINCRBY against non existing database key
[ok]: HINCRBY against non existing hash key
[ok]: HINCRBY against hash key created by hincrby itself
[ok]: HINCRBY against hash key originally set with HSET
[ok]: HINCRBY over 32bit value
[ok]: HINCRBY over 32bit value with over 32bit increment
[ok]: HINCRBY fails against hash value with spaces (left)
[ok]: HINCRBY fails against hash value with spaces (right)
[ok]: HINCRBY can detect overflows
[ok]: HINCRBYFLOAT against non existing database key
[ok]: HINCRBYFLOAT against non existing hash key
[ok]: HINCRBYFLOAT against hash key created by hincrby itself
[ok]: HINCRBYFLOAT against hash key originally set with HSET
[ok]: HINCRBYFLOAT over 32bit value
[ok]: HINCRBYFLOAT over 32bit value with over 32bit increment
[ok]: HINCRBYFLOAT fails against hash value with spaces (left)
[ok]: HINCRBYFLOAT fails against hash value with spaces (right)
[ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle
[ok]: HSTRLEN against the small hash
[ok]: Old Linked list: SORT BY key
[ok]: Old Linked list: SORT BY key with limit
[ok]: Old Linked list: SORT BY hash field
[ok]: HSTRLEN against the big hash
[ok]: HSTRLEN against non existing field
[ok]: HSTRLEN corner cases
[ok]: Hash ziplist regression test for large keys
[ok]: Hash fuzzing #1 - 10 fields
[ok]: Hash fuzzing #2 - 10 fields
[ok]: XCLAIM can claim PEL items from another consumer
[ok]: Regression for a crash with blocking ops and pipelining
[4/57 done]: unit/protocol (1 seconds)
Testing unit/multi
[ok]: MUTLI / EXEC basics
[ok]: DISCARD
[ok]: Nested MULTI are not allowed
[ok]: MULTI where commands alter argc/argv
[ok]: WATCH inside MULTI is not allowed
[ok]: EXEC fails if there are errors while queueing commands #1
[ok]: EXEC fails if there are errors while queueing commands #2
[ok]: If EXEC aborts, the client MULTI state is cleared
[ok]: EXEC works on WATCHed key not modified
[ok]: EXEC fail on WATCHed key modified (1 key of 1 watched)
[ok]: EXEC fail on WATCHed key modified (1 key of 5 watched)
[ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty
[ok]: After successful EXEC key is no longer watched
[ok]: After failed EXEC key is no longer watched
[ok]: It is possible to UNWATCH
[ok]: UNWATCH when there is nothing watched works as expected
[ok]: FLUSHALL is able to touch the watched keys
[ok]: FLUSHALL does not touch non affected keys
[ok]: FLUSHDB is able to touch the watched keys
[ok]: FLUSHDB does not touch non affected keys
[ok]: WATCH is able to remember the DB a key belongs to
[ok]: WATCH will consider touched keys target of EXPIRE
[ok]: BRPOPLPUSH with zero timeout should block indefinitely
[ok]: DEL against expired key
[ok]: EXISTS
[ok]: Zero length value in key. SET/GET/EXISTS
[ok]: Commands pipelining
[ok]: Non existing command
[ok]: RENAME basic usage
[ok]: RENAME source key should no longer exist
[ok]: RENAME against already existing key
[ok]: RENAMENX basic usage
[ok]: RENAMENX against already existing key
[ok]: RENAMENX against already existing key (2)
[ok]: RENAME against non existing source key
[ok]: RENAME where source and dest key are the same (existing)
[ok]: RENAMENX where source and dest key are the same (existing)
[ok]: RENAME where source and dest key are the same (non existing)
[ok]: RENAME with volatile key, should move the TTL as well
[ok]: RENAME with volatile key, should not inherit TTL of target key
[ok]: DEL all keys again (DB 0)
[ok]: DEL all keys again (DB 1)
[ok]: MOVE basic usage
[ok]: MOVE against key existing in the target DB
[ok]: MOVE against non-integer DB (#1428)
[ok]: MOVE can move key expire metadata as well
[ok]: MOVE does not create an expire if it does not exist
[ok]: SET/GET keys in different DBs
[ok]: RANDOMKEY
[ok]: RANDOMKEY against empty DB
[ok]: RANDOMKEY regression 1
[ok]: KEYS * two times with long key, Github issue #1208
[ok]: XCLAIM without JUSTID increments delivery count
[ok]: XINFO FULL output
[5/57 done]: unit/keyspace (1 seconds)
Testing unit/quit
[ok]: Consumer group last ID propagation to slave (NOACK=0)
[ok]: QUIT returns OK
[ok]: Pipelined commands after QUIT must not be executed
[ok]: FUZZ stresser with data model binary
[ok]: Pipelined commands after QUIT that exceed read buffer size
[ok]: Consumer group last ID propagation to slave (NOACK=1)
[6/57 done]: unit/quit (1 seconds)
Testing unit/aofrw
[ok]: BRPOPLPUSH with a client BLPOPing the target list
[ok]: BRPOPLPUSH with wrong source type
[ok]: WATCH will not consider touched expired keys
[ok]: DISCARD should clear the WATCH dirty flag on the client
[ok]: DISCARD should UNWATCH all the keys
[ok]: MULTI / EXEC is propagated correctly (single write command)
[ok]: MULTI / EXEC is propagated correctly (empty transaction)
[ok]: MULTI / EXEC is propagated correctly (read-only commands)
[ok]: EXPIRE - After 2.1 seconds the key should no longer be here
[ok]: EXPIRE - write on expire should work
[ok]: EXPIREAT - Check for EXPIRE alike behavior
[ok]: SETEX - Set + Expire combo operation. Check for TTL
[ok]: SETEX - Check value
[ok]: SETEX - Overwrite old key
[ok]: MULTI / EXEC is propagated correctly (write command, no effect)
[ok]: DISCARD should not fail during OOM
[ok]: FUZZ stresser with data model alpha
[ok]: Empty stream with no lastid can be rewrite into AOF correctly
[ok]: MULTI and script timeout
[ok]: BRPOPLPUSH with wrong destination type
[ok]: BRPOPLPUSH maintains order of elements after failure
[ok]: BRPOPLPUSH with multiple blocked clients
[ok]: Linked BRPOPLPUSH
[ok]: Circular BRPOPLPUSH
[ok]: Self-referential BRPOPLPUSH
[ok]: BRPOPLPUSH inside a transaction
[ok]: PUSH resulting from BRPOPLPUSH affect WATCH
[ok]: BRPOPLPUSH does not affect WATCH while still blocked
[ok]: Hash fuzzing #1 - 512 fields
[7/57 done]: unit/type/stream-cgroups (3 seconds)
Testing unit/acl
[ok]: EXEC and script timeout
[ok]: Connections start with the default user
[ok]: It is possible to create new users
[ok]: New users start disabled
[ok]: Enabling the user allows the login
[ok]: Only the set of correct passwords work
[ok]: It is possible to remove passwords from the set of valid ones
[ok]: Test password hashes can be added
[ok]: Test password hashes validate input
[ok]: ACL GETUSER returns the password hash instead of the actual password
[ok]: Test hashed passwords removal
[ok]: By default users are not able to access any command
[ok]: By default users are not able to access any key
[ok]: It's possible to allow the access of a subset of keys
[ok]: Users can be configured to authenticate with any password
[ok]: ACLs can exclude single commands
[ok]: ACLs can include or exclude whole classes of commands
[ok]: ACLs can include single subcommands
[ok]: ACL GETUSER is able to translate back command permissions
[ok]: ACL #5998 regression: memory leaks adding / removing subcommands
[ok]: ACL LOG shows failed command executions at toplevel
[ok]: ACL LOG is able to test similar events
[ok]: ACL LOG is able to log keys access violations and key name
[ok]: ACL LOG RESET is able to flush the entries in the log
[ok]: ACL LOG can distinguish the transaction context (1)
[ok]: ACL LOG can distinguish the transaction context (2)
[ok]: ACL can log errors in the context of Lua scripting
[ok]: ACL LOG can accept a numerical argument to show less entries
[ok]: ACL LOG can log failed auth attempts
[ok]: ACL LOG entries are limited to a maximum amount
[ok]: When default user is off, new connections are not authenticated
[ok]: ACL HELP should not have unexpected options
[ok]: SETEX - Wait for the key to expire
[ok]: SETEX - Wrong time parameter
[ok]: PERSIST can undo an EXPIRE
[ok]: PERSIST returns 0 against non existing or non volatile keys
[8/57 done]: unit/acl (1 seconds)
Testing unit/latency-monitor
[ok]: MULTI-EXEC body and script timeout
[ok]: XADD mass insertion and XLEN
[ok]: XADD with ID 0-0
[ok]: XRANGE COUNT works as expected
[ok]: XREVRANGE COUNT works as expected
[ok]: FUZZ stresser with data model compr
[ok]: just EXEC and script timeout
[ok]: exec with write commands and state change
[ok]: exec with read commands and stale replica state change
[ok]: EXEC with only read commands should not be rejected when OOM
[ok]: EXEC with at least one use-memory command should fail
[ok]: Very big payload random access
[9/57 done]: unit/multi (3 seconds)
Testing integration/block-repl
[ok]: Old Big Linked list: SORT BY key
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: Old Big Linked list: SORT BY key with limit
[ok]: Hash fuzzing #2 - 512 fields
[ok]: XRANGE can be used to iterate the whole stream
[ok]: BGSAVE
[ok]: SELECT an out of range DB
[ok]: BRPOPLPUSH timeout
[ok]: BLPOP when new key is moved into place
[ok]: BLPOP when result key is created by SORT..STORE
[ok]: BLPOP: with single empty list argument
[ok]: BLPOP: with negative timeout
[ok]: BLPOP: with non-integer timeout
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: EXPIRE pricision is now the millisecond
[ok]: First server should have role slave after SLAVEOF
[ok]: Old Big Linked list: SORT BY hash field
[ok]: Intset: SORT BY key
[ok]: Intset: SORT BY key with limit
[ok]: Intset: SORT BY hash field
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: ZSETs skiplist implementation backlink consistency test - ziplist
[ok]: BLPOP: with zero timeout should block indefinitely
[ok]: BLPOP: second argument is not a list
[ok]: Hash table: SORT BY key
[ok]: Hash table: SORT BY key with limit
[ok]: Hash table: SORT BY hash field
[ok]: Check consistency of different data types after a reload
[ok]: BLPOP: timeout
[ok]: BLPOP: arguments are empty
[ok]: BRPOP: with single empty list argument
[ok]: BRPOP: with negative timeout
[ok]: BRPOP: with non-integer timeout
[ok]: SET 10000 numeric keys and access all them in reverse order
[ok]: DBSIZE should be 10000 now
[ok]: SETNX target key missing
[ok]: SETNX target key exists
[ok]: SETNX against not-expired volatile key
[ok]: Test latency events logging
[ok]: LATENCY HISTORY output is ok
[ok]: LATENCY LATEST output is ok
[ok]: LATENCY HISTORY / RESET with wrong event name is fine
[ok]: LATENCY DOCTOR produces some output
[ok]: LATENCY RESET is able to reset events
[ok]: PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires
[ok]: TTL returns time to live in seconds
[ok]: PTTL returns time to live in milliseconds
[ok]: TTL / PTTL return -1 if key has no expire
[ok]: TTL / PTTL return -2 if key does not exit
[ok]: ZSETs ZRANK augmented skip list stress testing - ziplist
[ok]: BZPOPMIN, ZADD + DEL should not awake blocked client
[ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client
[ok]: BZPOPMIN with same key multiple times should work
[ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN
[ok]: Stress test the hash ziplist -> hashtable encoding conversion
[ok]: BZPOPMIN with variadic ZADD
[ok]: Test HINCRBYFLOAT for correct float representation (issue #2846)
[10/57 done]: unit/type/hash (8 seconds)
Testing integration/replication
[ok]: Same dataset digest if saving/reloading as AOF?
[ok]: SDIFF fuzzing
[ok]: SINTER against non-set should throw error
[ok]: SUNION against non-set should throw error
[ok]: SINTER should handle non existing key as empty
[ok]: SINTER with same integer elements but different encoding
[ok]: Slave enters handshake
[ok]: SINTERSTORE against non existing keys should delete dstkey
[ok]: SUNIONSTORE against non existing keys should delete dstkey
[ok]: SPOP basics - hashtable
[ok]: SPOP with =1 - hashtable
[ok]: SRANDMEMBER - hashtable
[ok]: SPOP basics - intset
[ok]: SPOP with =1 - intset
[ok]: SRANDMEMBER - intset
[ok]: BRPOP: with zero timeout should block indefinitely
[ok]: BRPOP: second argument is not a list
[ok]: SPOP with 
[ok]: SPOP with 
[ok]: SPOP using integers, testing Knuth's and Floyd's algorithm
[ok]: SPOP using integers with Knuth's algorithm
[ok]: SPOP new implementation: code path #1
[ok]: SPOP new implementation: code path #2
[ok]: SPOP new implementation: code path #3
[ok]: SRANDMEMBER with  against non existing key
[ok]: SRANDMEMBER with  - hashtable
[ok]: SRANDMEMBER with  - intset
[ok]: SMOVE basics - from regular set to intset
[ok]: SMOVE basics - from intset to regular set
[ok]: SMOVE non existing key
[ok]: SMOVE non existing src set
[ok]: SMOVE from regular set to non existing destination set
[ok]: SMOVE from intset to non existing destination set
[ok]: SMOVE wrong src key type
[ok]: SMOVE wrong dst key type
[ok]: SMOVE with identical source and destination
[ok]: Redis should actively expire keys incrementally
[ok]: BZPOPMIN with zero timeout should block indefinitely
[ok]: ZSCORE - skiplist
[ok]: ZMSCORE - skiplist
[ok]: ZSCORE after a DEBUG RELOAD - skiplist
[ok]: ZSET sorting stresser - skiplist
[ok]: EXPIRES after a reload (snapshot + append only file rewrite)
[ok]: BRPOP: timeout
[ok]: BRPOP: arguments are empty
[ok]: BLPOP inside a transaction
[ok]: LPUSHX, RPUSHX - generic
[ok]: LPUSHX, RPUSHX - linkedlist
[ok]: LINSERT - linkedlist
[ok]: LPUSHX, RPUSHX - ziplist
[ok]: LINSERT - ziplist
[ok]: LINSERT raise error on bad syntax
[ok]: LINDEX consistency test - quicklist
[ok]: Redis should lazy expire keys
[ok]: LINDEX random access - quicklist
[ok]: Check if list is still ok after a DEBUG RELOAD - quicklist
[ok]: XREVRANGE returns the reverse of XRANGE
[ok]: XREAD with non empty stream
[ok]: Non blocking XREAD with empty streams
[ok]: XREAD with non empty second stream
[ok]: Blocking XREAD waiting new data
[ok]: Blocking XREAD waiting old data
[ok]: Blocking XREAD will not reply with an empty array
[ok]: XREAD: XADD + DEL should not awake client
[ok]: XREAD: XADD + DEL + LPUSH should not awake client
[ok]: XREAD with same stream name multiple times should work
[ok]: XREAD + multiple XADD inside transaction
[ok]: XDEL basic test
[ok]: LINDEX consistency test - quicklist
[ok]: intsets implementation stress testing
[ok]: LINDEX random access - quicklist
[11/57 done]: unit/type/set (10 seconds)
Testing integration/replication-2
[ok]: Check if list is still ok after a DEBUG RELOAD - quicklist
[ok]: LLEN against non-list value error
[ok]: LLEN against non existing key
[ok]: LINDEX against non-list value error
[ok]: LINDEX against non existing key
[ok]: LPUSH against non-list value error
[ok]: RPUSH against non-list value error
[ok]: RPOPLPUSH base case - linkedlist
[ok]: RPOPLPUSH with the same list as src and dst - linkedlist
[ok]: RPOPLPUSH with linkedlist source and existing target linkedlist
[ok]: RPOPLPUSH with linkedlist source and existing target ziplist
[ok]: RPOPLPUSH base case - ziplist
[ok]: RPOPLPUSH with the same list as src and dst - ziplist
[ok]: RPOPLPUSH with ziplist source and existing target linkedlist
[ok]: RPOPLPUSH with ziplist source and existing target ziplist
[ok]: RPOPLPUSH against non existing key
[ok]: RPOPLPUSH against non list src key
[ok]: RPOPLPUSH against non list dst key
[ok]: RPOPLPUSH against non existing src key
[ok]: Basic LPOP/RPOP - linkedlist
[ok]: Basic LPOP/RPOP - ziplist
[ok]: LPOP/RPOP against non list value
[ok]: Mass RPOP/LPOP - quicklist
[ok]: First server should have role slave after SLAVEOF
[ok]: If min-slaves-to-write is honored, write is accepted
[ok]: No write if min-slaves-to-write is < attached slaves
[ok]: If min-slaves-to-write is honored, write is accepted (again)
[ok]: EXPIRE should not resurrect keys (issue #1026)
[ok]: 5 keys in, 5 keys out
[ok]: EXPIRE with empty string as TTL should report an error
[ok]: SCAN regression test for issue #4906
[ok]: Mass RPOP/LPOP - quicklist
[ok]: LRANGE basics - linkedlist
[ok]: LRANGE inverted indexes - linkedlist
[ok]: LRANGE out of range indexes including the full list - linkedlist
[ok]: LRANGE out of range negative end index - linkedlist
[ok]: LRANGE basics - ziplist
[ok]: LRANGE inverted indexes - ziplist
[ok]: LRANGE out of range indexes including the full list - ziplist
[ok]: LRANGE out of range negative end index - ziplist
[ok]: LRANGE against non existing key
[ok]: LTRIM basics - linkedlist
[ok]: LTRIM out of range negative end index - linkedlist
[ok]: LTRIM basics - ziplist
[ok]: LTRIM out of range negative end index - ziplist
[ok]: LSET - linkedlist
[ok]: LSET out of range index - linkedlist
[ok]: LSET - ziplist
[ok]: LSET out of range index - ziplist
[ok]: LSET against non existing key
[ok]: LSET against non list value
[ok]: LREM remove all the occurrences - linkedlist
[ok]: LREM remove the first occurrence - linkedlist
[ok]: LREM remove non existing element - linkedlist
[ok]: LREM starting from tail with negative count - linkedlist
[ok]: LREM starting from tail with negative count (2) - linkedlist
[ok]: LREM deleting objects that may be int encoded - linkedlist
[ok]: LREM remove all the occurrences - ziplist
[ok]: LREM remove the first occurrence - ziplist
[ok]: LREM remove non existing element - ziplist
[ok]: LREM starting from tail with negative count - ziplist
[ok]: LREM starting from tail with negative count (2) - ziplist
[ok]: LREM deleting objects that may be int encoded - ziplist
[12/57 done]: unit/scan (10 seconds)
Testing integration/replication-3
[ok]: SETNX against expired volatile key
[ok]: MGET
[ok]: MGET against non existing key
[ok]: MGET against non-string key
[ok]: GETSET (set new value)
[ok]: GETSET (replace old value)
[ok]: MSET base case
[ok]: MSET wrong number of args
[ok]: MSETNX with already existent key
[ok]: MSETNX with not existing keys
[ok]: STRLEN against non-existing key
[ok]: STRLEN against integer-encoded value
[ok]: STRLEN against plain string
[ok]: SETBIT against non-existing key
[ok]: SETBIT against string-encoded key
[ok]: SETBIT against integer-encoded key
[ok]: SETBIT against key with wrong type
[ok]: SETBIT with out of range bit offset
[ok]: SETBIT with non-bit argument
[ok]: First server should have role slave after SLAVEOF
[ok]: Big Hash table: SORT BY key
[ok]: Big Hash table: SORT BY key with limit
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist
[ok]: SETBIT fuzzing
[ok]: GETBIT against non-existing key
[ok]: GETBIT against string-encoded key
[ok]: GETBIT against integer-encoded key
[ok]: SETRANGE against non-existing key
[ok]: SETRANGE against string-encoded key
[ok]: SETRANGE against integer-encoded key
[ok]: SETRANGE against key with wrong type
[ok]: SETRANGE with out of range offset
[ok]: GETRANGE against non-existing key
[ok]: GETRANGE against string value
[ok]: GETRANGE against integer-encoded value
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist
[ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds
[ok]: client unblock tests
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist
[ok]: ZSETs skiplist implementation backlink consistency test - skiplist
[ok]: Big Hash table: SORT BY hash field
[ok]: SORT GET #
[ok]: SORT GET 
[ok]: SORT GET (key and hash) with sanity check
[ok]: SORT BY key STORE
[ok]: SORT BY hash field STORE
[ok]: SORT extracts STORE correctly
[ok]: SORT extracts multiple STORE correctly
[ok]: SORT DESC
[ok]: SORT ALPHA against integer encoded strings
[ok]: SORT sorted set
[ok]: SORT sorted set BY nosort should retain ordering
[ok]: SORT sorted set BY nosort + LIMIT
[ok]: SORT sorted set BY nosort works as expected from scripts
[ok]: SORT sorted set: +inf and -inf handling
[ok]: SORT regression for issue #19, sorting floats
[ok]: SORT with STORE returns zero if result is empty (github issue 224)
[ok]: SORT with STORE does not create empty lists (github issue 224)
[ok]: SORT with STORE removes key if result is empty (github issue 227)
[ok]: SORT with BY  and STORE should still order output
[ok]: SORT will complain with numerical sorting and bad doubles (1)
[ok]: SORT will complain with numerical sorting and bad doubles (2)
[ok]: SORT BY sub-sorts lexicographically if score is the same
[ok]: SORT GET with pattern ending with just -> does not get hash field
[ok]: SORT by nosort retains native order for lists
[ok]: SORT by nosort plus store retains native order for lists
[ok]: SORT by nosort with limit returns based on original list order
[ok]: SORT speed, 100 element list BY key, 100 times
[13/57 done]: unit/type/list (11 seconds)
Testing integration/replication-4
[ok]: SORT speed, 100 element list BY hash field, 100 times
[ok]: SORT speed, 100 element list directly, 100 times
[ok]: SORT speed, 100 element list BY , 100 times
[14/57 done]: unit/sort (12 seconds)
Testing integration/replication-psync
[ok]: Slave should be able to synchronize with the master
[ok]: EXPIRES after AOF reload (without rewrite)
[ok]: XDEL fuzz test
[ok]: Stress tester for #3343-alike bugs
[ok]: ZSETs ZRANK augmented skip list stress testing - skiplist
[ok]: BZPOPMIN, ZADD + DEL should not awake blocked client
[ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client
[ok]: BZPOPMIN with same key multiple times should work
[ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN
[ok]: BZPOPMIN with variadic ZADD
[ok]: GETRANGE fuzzing
[ok]: Extended SET can detect syntax errors
[ok]: Extended SET NX option
[ok]: Extended SET XX option
[ok]: Extended SET EX option
[ok]: Extended SET PX option
[ok]: Extended SET using multiple options at once
[ok]: GETRANGE with huge ranges, Github issue #1844
[ok]: STRALGO LCS string output with STRINGS option
[ok]: STRALGO LCS len
[ok]: LCS with KEYS option
[ok]: LCS indexes
[ok]: LCS indexes with match len
[ok]: LCS indexes with match len and minimum match len
[ok]: First server should have role slave after SLAVEOF
[15/57 done]: unit/type/string (13 seconds)
Testing integration/aof
[ok]: Detect write load to master
[ok]: Unfinished MULTI: Server should start if load-truncated is yes
[ok]: LTRIM stress testing - linkedlist
[ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0)
[ok]: Short read: Server should start if load-truncated is yes
[ok]: Truncated AOF loaded: we expect foo to be equal to 5
[ok]: Append a new command after loading an incomplete AOF
[ok]: BZPOPMIN with zero timeout should block indefinitely
[ok]: Short read + command: Server should start
[ok]: Truncated AOF loaded: we expect foo to be equal to 6 now
[ok]: Slave should be able to synchronize with the master
[ok]: Bad format: Server should have logged an error
[ok]: SET - use EX/PX option, TTL should not be reseted after loadaof
[ok]: SET command will remove expire
[ok]: SET - use KEEPTTL option, TTL should not be removed
[ok]: Unfinished MULTI: Server should have logged an error
[ok]: Short read: Server should have logged an error
[ok]: Short read: Utility should confirm the AOF is not valid
[ok]: Short read: Utility should be able to fix the AOF
[ok]: Fixed AOF: Server should have been started
[ok]: Fixed AOF: Keyspace should contain values that were parseable
[ok]: Detect write load to master
[ok]: AOF+SPOP: Server should have been started
[ok]: AOF+SPOP: Set should have 1 member
[ok]: PIPELINING stresser (also a regression for the old epoll bug)
[ok]: APPEND basics
[ok]: APPEND basics, integer encoded values
[ok]: MIGRATE cached connections are released after some time
[ok]: ZSET skiplist order consistency when elements are moved
[ok]: AOF+SPOP: Server should have been started
[ok]: AOF+SPOP: Set should have 1 member
[16/57 done]: unit/type/zset (15 seconds)
Testing integration/rdb
[ok]: MIGRATE is able to migrate a key between two instances
[ok]: RDB encoding loading test
[ok]: APPEND fuzzing
[ok]: AOF+EXPIRE: Server should have been started
[ok]: AOF+EXPIRE: List should be empty
[ok]: ziplist implementation: value encoding and backlink
[ok]: FLUSHDB
[ok]: Perform a final SAVE to leave a clean DB on disk
[ok]: Server started empty with non-existing RDB file
[ok]: MIGRATE is able to copy a key between two instances
[17/57 done]: unit/other (16 seconds)
Testing integration/convert-zipmap-hash-on-load
[ok]: RDB load zipmap hash: converts to ziplist
[ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1
[ok]: No write if min-slaves-max-lag is > of the slave lag
[ok]: min-slaves-to-write is ignored by slaves
[ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof
[ok]: Server started empty with empty RDB file
[18/57 done]: unit/expire (16 seconds)
Testing integration/logging
[ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded
[ok]: Test RDB stream encoding
[ok]: MIGRATE propagates TTL correctly
[ok]: Server is able to generate a stack trace on selected systems
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded
[ok]: Server should not start if RDB file can't be open
[19/57 done]: integration/logging (1 seconds)
Testing integration/psync2
[20/57 done]: integration/convert-zipmap-hash-on-load (1 seconds)
Testing integration/psync2-reg
[ok]: Server should not start if RDB is corrupted
[ok]: Test FLUSHALL aborts bgsave
[ok]: bgsave resets the change counter
[ok]: PSYNC2: --- CYCLE 1 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #0 as master
[ok]: PSYNC2: Set #4 to replicate from #0
[ok]: PSYNC2: Set #1 to replicate from #0
[ok]: PSYNC2: Set #3 to replicate from #1
[ok]: PSYNC2: Set #2 to replicate from #4
[ok]: Slave is able to detect timeout during handshake
[ok]: PSYNC2 #3899 regression: setup
[ok]: PSYNC2: cluster is consistent after failover
[ok]: Set instance A as slave of B
[ok]: Test replication with parallel clients writing in differnet DBs
[ok]: LATENCY of expire events are correctly collected
[ok]: LATENCY HELP should not have unexpected options
[ok]: PSYNC2 #3899 regression: kill first replica
[21/57 done]: unit/latency-monitor (15 seconds)
Testing integration/psync2-pingoff
[ok]: INCRBYFLOAT replication, should not remove expire
[ok]: BRPOPLPUSH replication, when blocking against empty list
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: First server should have role slave after SLAVEOF
[ok]: With min-slaves-to-write (1,3): master should be writable
[ok]: With min-slaves-to-write (2,3): master should not be writable
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: PSYNC2 pingoff: setup
[ok]: PSYNC2 pingoff: write and wait replication
[ok]: BRPOPLPUSH replication, list exists
[ok]: AOF rewrite during write load: RDB preamble=yes
[ok]: BLPOP followed by role change, issue #2473
[ok]: Second server should have role master at first
[ok]: SLAVEOF should start with link status "down"
[ok]: The role should immediately be changed to "replica"
[ok]: Sync should have transferred keys from master
[ok]: The link status should be up
[ok]: SET on the master should immediately propagate
[ok]: FLUSHALL should replicate
[ok]: ROLE in master reports master with a slave
[ok]: ROLE in slave reports slave in connected state
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: AOF fsync always barrier issue
[ok]: PSYNC2 #3899 regression: kill chained replica
[22/57 done]: integration/aof (10 seconds)
Testing integration/redis-cli
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: Interactive CLI: INFO response should be printed raw
[ok]: Interactive CLI: Status reply
[ok]: Interactive CLI: Integer reply
[ok]: Interactive CLI: Bulk reply
[ok]: client freed during loading
[23/57 done]: integration/rdb (8 seconds)
Testing unit/pubsub
[ok]: Interactive CLI: Multi-bulk reply
[ok]: Interactive CLI: Parsing quotes
[ok]: Non-interactive TTY CLI: Status reply
[ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1)
[ok]: Non-interactive TTY CLI: Integer reply
[ok]: Pub/Sub PING
[ok]: PUBLISH/SUBSCRIBE basics
[ok]: PUBLISH/SUBSCRIBE with two clients
[ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments
[ok]: SUBSCRIBE to one channel more than once
[ok]: UNSUBSCRIBE from non-subscribed channels
[ok]: PUBLISH/PSUBSCRIBE basics
[ok]: PUBLISH/PSUBSCRIBE with two clients
[ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments
[ok]: PUNSUBSCRIBE from non-subscribed channels
[ok]: NUMSUB returns numbers, not strings (#1561)
[ok]: Mix SUBSCRIBE and PSUBSCRIBE
[ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply
[ok]: Keyspace notifications: we receive keyspace notifications
[ok]: Keyspace notifications: we receive keyevent notifications
[ok]: Keyspace notifications: we can receive both kind of events
[ok]: Keyspace notifications: we are able to mask events
[ok]: Keyspace notifications: general events test
[ok]: Keyspace notifications: list events test
[ok]: Keyspace notifications: set events test
[ok]: Non-interactive TTY CLI: Bulk reply
[ok]: Keyspace notifications: zset events test
[ok]: Keyspace notifications: hash events test
[ok]: Non-interactive TTY CLI: Multi-bulk reply
[ok]: Non-interactive TTY CLI: Read last argument from pipe
[ok]: Non-interactive TTY CLI: Read last argument from file
[ok]: Non-interactive non-TTY CLI: Status reply
[ok]: Non-interactive non-TTY CLI: Integer reply
[ok]: Non-interactive non-TTY CLI: Bulk reply
[ok]: Keyspace notifications: expired events (triggered expire)
[ok]: Non-interactive non-TTY CLI: Multi-bulk reply
[ok]: Non-interactive non-TTY CLI: Read last argument from pipe
[ok]: Non-interactive non-TTY CLI: Read last argument from file
[ok]: Keyspace notifications: expired events (background expire)
[ok]: Keyspace notifications: evicted events
[ok]: Keyspace notifications: test CONFIG GET/SET of event flags
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 17707)
[24/57 done]: unit/pubsub (1 seconds)
Testing unit/slowlog
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 2 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #0 as master
[ok]: PSYNC2: Set #1 to replicate from #0
[ok]: PSYNC2: Set #4 to replicate from #1
[ok]: PSYNC2: Set #3 to replicate from #1
[ok]: PSYNC2: Set #2 to replicate from #0
[ok]: With min-slaves-to-write: master not writable with lagged slave
[ok]: MASTER and SLAVE consistency with expire
[ok]: SLOWLOG - check that it starts with an empty log
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: SLOWLOG - only logs commands taking more time than specified
[ok]: SLOWLOG - max entries is correctly handled
[ok]: SLOWLOG - GET optional argument to limit output len works
[ok]: SLOWLOG - RESET subcommand works
[ok]: Slave should be able to synchronize with the master
[ok]: SLOWLOG - logged entry sanity check
[ok]: SLOWLOG - commands with too many arguments are trimmed
[ok]: SLOWLOG - too long arguments are trimmed
[ok]: First server should have role slave after SLAVEOF
[ok]: SLOWLOG - EXEC is not logged, just executed commands
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: PSYNC2: cluster is consistent after failover
[ok]: SLOWLOG - can clean older entires
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: SLOWLOG - can be disabled
[ok]: Detect write load to master
[25/57 done]: unit/slowlog (2 seconds)
Testing unit/scripting
[ok]: PSYNC2 pingoff: pause replica and promote it
[ok]: EVAL - Does Lua interpreter replies to our requests?
[ok]: EVAL - Lua integer -> Redis protocol type conversion
[ok]: EVAL - Lua string -> Redis protocol type conversion
[ok]: EVAL - Lua true boolean -> Redis protocol type conversion
[ok]: EVAL - Lua false boolean -> Redis protocol type conversion
[ok]: EVAL - Lua status code reply -> Redis protocol type conversion
[ok]: EVAL - Lua error reply -> Redis protocol type conversion
[ok]: EVAL - Lua table -> Redis protocol type conversion
[ok]: EVAL - Are the KEYS and ARGV arrays populated correctly?
[ok]: EVAL - is Lua able to call Redis API?
[ok]: EVALSHA - Can we call a SHA1 if already defined?
[ok]: EVALSHA - Can we call a SHA1 in uppercase?
[ok]: EVALSHA - Do we get an error on invalid SHA1?
[ok]: EVALSHA - Do we get an error on non defined SHA1?
[ok]: EVAL - Redis integer -> Lua type conversion
[ok]: EVAL - Redis bulk -> Lua type conversion
[ok]: EVAL - Redis multi bulk -> Lua type conversion
[ok]: EVAL - Redis status reply -> Lua type conversion
[ok]: EVAL - Redis error reply -> Lua type conversion
[ok]: EVAL - Redis nil bulk reply -> Lua type conversion
[ok]: EVAL - Is the Lua client using the currently selected DB?
[ok]: EVAL - SELECT inside Lua should not affect the caller
[ok]: EVAL - Scripts can't run certain commands
[ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option
[ok]: EVAL - Scripts can't run certain commands
[ok]: EVAL - No arguments to redis.call/pcall is considered an error
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - JSON numeric decoding
[ok]: EVAL - JSON string decoding
[ok]: EVAL - cmsgpack can pack double?
[ok]: EVAL - cmsgpack can pack negative int64?
[ok]: EVAL - cmsgpack can pack and unpack circular references?
[ok]: EVAL - Numerical sanity check from bitop
[ok]: EVAL - Verify minimal bitop functionality
[ok]: EVAL - Able to parse trailing comments
[ok]: SCRIPTING FLUSH - is able to clear the scripts cache?
[ok]: SCRIPT EXISTS - can detect already defined scripts?
[ok]: SCRIPT LOAD - is able to register scripts in the scripting cache
[ok]: In the context of Lua the output of random commands gets ordered
[ok]: SORT is normally not alpha re-ordered for the scripting engine
[ok]: SORT BY  output gets ordered for scripting
[ok]: SORT BY  with GET gets ordered for scripting
[ok]: redis.sha1hex() implementation
[ok]: Globals protection reading an undeclared global variable
[ok]: Globals protection setting an undeclared global*
[ok]: Test an example script DECR_IF_GT
[ok]: Scripting engine resets PRNG at every script execution
[ok]: Scripting engine PRNG can be seeded correctly
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: Make the old master a replica of the new one and check conditions
[ok]: EVAL does not leak in the Lua stack
[ok]: EVAL processes writes from AOF in read-only slaves
[ok]: We can call scripts rewriting client->argv from Lua
[ok]: Call Redis command with many args from Lua (issue #1764)
[ok]: Number conversion precision test (issue #1118)
[ok]: String containing number precision test (regression of issue #1118)
[ok]: Verify negative arg count is error instead of crash (issue #1842)
[ok]: Correct handling of reused argv (issue #1939)
[ok]: Functions in the Redis namespace are able to report errors
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: Timedout script link is still usable after Lua returns
[ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL
[ok]: SHUTDOWN NOSAVE can kill a timedout script anyway
[ok]: Before the replica connects we issue two EVAL commands (scripts replication)
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 32571)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 3 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #3 as master
[ok]: PSYNC2: Set #4 to replicate from #3
[ok]: PSYNC2: Set #0 to replicate from #3
[ok]: PSYNC2: Set #2 to replicate from #4
[ok]: PSYNC2: Set #1 to replicate from #3
[ok]: Connect a replica to the master instance (scripts replication)
[ok]: Now use EVALSHA against the master, with both SHAs (scripts replication)
[ok]: If EVALSHA was replicated as EVAL, 'x' should be '4' (scripts replication)
[ok]: Replication of script multiple pushes to list with BLPOP (scripts replication)
[ok]: EVALSHA replication when first call is readonly (scripts replication)
[ok]: Lua scripts using SELECT are replicated correctly (scripts replication)
[ok]: Slave is able to evict keys created in writable slaves
[ok]: Test replication with blocking lists and sorted sets operations
[ok]: Before the replica connects we issue two EVAL commands (commands replication)
[ok]: Connect a replica to the master instance (commands replication)
[ok]: Now use EVALSHA against the master, with both SHAs (commands replication)
[ok]: If EVALSHA was replicated as EVAL, 'x' should be '4' (commands replication)
[ok]: Replication of script multiple pushes to list with BLPOP (commands replication)
[ok]: EVALSHA replication when first call is readonly (commands replication)
[ok]: Lua scripts using SELECT are replicated correctly (commands replication)
[ok]: PSYNC2: cluster is consistent after failover
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: First server should have role slave after SLAVEOF
[26/57 done]: integration/block-repl (27 seconds)
Testing unit/maxmemory
[ok]: Without maxmemory small integers are shared
[ok]: With maxmemory and non-LRU policy integers are still shared
[ok]: With maxmemory and LRU policy integers are not shared
[ok]: LTRIM stress testing - ziplist
[ok]: Connect a replica to the master instance
[ok]: Redis.replicate_commands() must be issued before any write
[ok]: Redis.replicate_commands() must be issued before any write (2)
[ok]: Redis.set_repl() must be issued after replicate_commands()
[ok]: Redis.set_repl() don't accept invalid values
[ok]: Test selective replication of certain Redis commands from Lua
[ok]: PRNG is seeded randomly for command replication
[ok]: Using side effects is not a problem with command replication
[27/57 done]: unit/type/list-2 (32 seconds)
Testing unit/introspection
[ok]: CLIENT LIST
[ok]: MONITOR can log executed commands
[ok]: MONITOR can log commands issued by the scripting engine
[ok]: CLIENT GETNAME should return NIL if name is not assigned
[ok]: CLIENT LIST shows empty fields for unassigned names
[ok]: CLIENT SETNAME does not accept spaces
[ok]: CLIENT SETNAME can assign a name to this connection
[ok]: CLIENT SETNAME can change the name of an existing connection
[ok]: test various edge cases of repl topology changes with missing pings at the end
[ok]: After CLIENT SETNAME, connection can still be closed
[ok]: CONFIG sanity
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-random)
[28/57 done]: unit/introspection (1 seconds)
Testing unit/introspection-2
[ok]: PSYNC2 #3899 regression: kill first replica
[29/57 done]: unit/scripting (7 seconds)
Testing unit/limits
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru)
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: Dumping an RDB
[ok]: MIGRATE can correctly transfer large values
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu)
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: Check if maxclients works refusing connections
[ok]: MIGRATE can correctly transfer hashes
[ok]: maxmemory - is the memory limit honoured? (policy volatile-lru)
[30/57 done]: unit/limits (1 seconds)
Testing unit/obuf-limits
[ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1)
[ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu)
[ok]: MIGRATE timeout actually works
[ok]: maxmemory - is the memory limit honoured? (policy volatile-random)
[ok]: MASTER and SLAVE dataset should be identical after complex ops
[ok]: MIGRATE can migrate multiple keys at once
[ok]: MIGRATE with multiple keys must have empty key arg
[ok]: Slave should be able to synchronize with the master
[ok]: Connecting as a replica
[ok]: TTL and TYPYE do not alter the last access time of a key
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 50660)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 4 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #0 as master
[ok]: PSYNC2: Set #2 to replicate from #0
[ok]: PSYNC2: Set #1 to replicate from #0
[ok]: PSYNC2: Set #4 to replicate from #2
[ok]: PSYNC2: Set #3 to replicate from #0
[ok]: PSYNC2: cluster is consistent after failover
[ok]: MIGRATE with multiple keys migrate just existing ones
[31/57 done]: integration/replication-2 (26 seconds)
Testing unit/bitops
[ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl)
[ok]: BITCOUNT returns 0 against non existing key
[ok]: BITCOUNT returns 0 with out of range indexes
[ok]: BITCOUNT returns 0 with negative indexes where start > end
[ok]: BITCOUNT against test vector #1
[ok]: BITCOUNT against test vector #2
[ok]: BITCOUNT against test vector #3
[ok]: BITCOUNT against test vector #4
[ok]: BITCOUNT against test vector #5
[ok]: MIGRATE with multiple keys: stress command rewriting
[ok]: Detect write load to master
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: PSYNC2 #3899 regression: kill chained replica
[ok]: MIGRATE with multiple keys: delete just ack keys
[ok]: Chained replicas disconnect when replica re-connect with the same master
[ok]: PSYNC2 #3899 regression: kill first replica
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random)
[ok]: MIGRATE AUTH: correct and wrong password cases
[ok]: BITCOUNT fuzzing without start/end
[32/57 done]: unit/dump (37 seconds)
Testing unit/bitfield
[ok]: BITFIELD signed SET and GET basics
[ok]: BITFIELD unsigned SET and GET basics
[ok]: BITFIELD # form
[ok]: BITFIELD basic INCRBY form
[ok]: BITFIELD chaining of multiple commands
[ok]: BITFIELD unsigned overflow wrap
[ok]: BITFIELD unsigned overflow sat
[ok]: BITFIELD signed overflow wrap
[ok]: BITFIELD signed overflow sat
[33/57 done]: integration/psync2-pingoff (19 seconds)
Testing unit/geo
[ok]: GEOADD create
[ok]: GEOADD update
[ok]: GEOADD invalid coordinates
[ok]: GEOADD multi add
[ok]: Check geoset values
[ok]: GEORADIUS simple (sorted)
[ok]: GEORADIUS withdist (sorted)
[ok]: GEORADIUS with COUNT
[ok]: GEORADIUS with COUNT but missing integer argument
[ok]: GEORADIUS with COUNT DESC
[ok]: GEORADIUS HUGE, issue #2767
[ok]: GEORADIUSBYMEMBER simple (sorted)
[ok]: GEORADIUSBYMEMBER withdist (sorted)
[ok]: GEOHASH is able to return geohash strings
[ok]: GEOPOS simple
[ok]: GEOPOS missing element
[ok]: GEODIST simple & unit
[ok]: GEODIST missing elements
[ok]: GEORADIUS STORE option: syntax error
[ok]: GEORANGE STORE option: incompatible options
[ok]: GEORANGE STORE option: plain usage
[ok]: GEORANGE STOREDIST option: plain usage
[ok]: GEORANGE STOREDIST option: COUNT ASC and DESC
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru)
[ok]: BITFIELD overflow detection fuzzing
[ok]: BITCOUNT fuzzing with start/end
[ok]: BITCOUNT with start, end
[ok]: BITCOUNT syntax error #1
[ok]: BITCOUNT regression test for github issue #582
[ok]: BITCOUNT misaligned prefix
[ok]: BITCOUNT misaligned prefix + full words + remainder
[ok]: BITOP NOT (empty string)
[ok]: BITOP NOT (known string)
[ok]: BITOP where dest and target are the same key
[ok]: BITOP AND|OR|XOR don't change the string with single input key
[ok]: BITOP missing key is considered a stream of zero
[ok]: BITOP shorter keys are zero-padded to the key with max length
[ok]: TOUCH alters the last access time of a key
[ok]: TOUCH returns the number of existing keys specified
[ok]: command stats for GEOADD
[ok]: command stats for EXPIRE
[ok]: command stats for BRPOP
[ok]: command stats for MULTI
[ok]: command stats for scripts
[ok]: ziplist implementation: encoding stress testing
[ok]: PSYNC2 #3899 regression: verify consistency
[34/57 done]: unit/introspection-2 (6 seconds)
Testing unit/memefficiency
[35/57 done]: unit/type/list-3 (39 seconds)
Testing unit/hyperloglog
[ok]: BITFIELD overflow wrap fuzzing
[ok]: BITFIELD regression for #3221
[ok]: BITFIELD regression for #3564
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru)
[36/57 done]: integration/psync2-reg (23 seconds)
Testing unit/lazyfree
[ok]: Piping raw protocol
[ok]: BITFIELD: setup slave
[ok]: BITFIELD: write on master, read on slave
[ok]: BITFIELD_RO fails when write option is used
[ok]: BITOP and fuzzing
[37/57 done]: unit/bitfield (3 seconds)
Testing unit/wait
[ok]: Memory efficiency with values in range 32
[ok]: Setup slave
[ok]: WAIT should acknowledge 1 additional copy of the data
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 68003)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 5 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #1 as master
[ok]: PSYNC2: Set #0 to replicate from #1
[ok]: PSYNC2: Set #3 to replicate from #1
[ok]: PSYNC2: Set #4 to replicate from #1
[ok]: PSYNC2: Set #2 to replicate from #4
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random)
[ok]: BITOP or fuzzing
[ok]: UNLINK can reclaim memory in background
[38/57 done]: integration/redis-cli (18 seconds)
Testing unit/pendingquerybuf
[ok]: Memory efficiency with values in range 64
[ok]: PSYNC2: cluster is consistent after failover
[ok]: WAIT should not acknowledge 2 additional copies of the data
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl)
[ok]: BITOP xor fuzzing
[ok]: FLUSHDB ASYNC can reclaim memory in background
[ok]: BITOP NOT fuzzing
[ok]: BITOP with integer encoded source objects
[ok]: BITOP with non string source key
[ok]: BITOP with empty string after non empty string (issue #529)
[ok]: BITPOS bit=0 with empty key returns 0
[ok]: BITPOS bit=1 with empty key returns -1
[ok]: BITPOS bit=0 with string less than 1 word works
[ok]: BITPOS bit=1 with string less than 1 word works
[ok]: BITPOS bit=0 starting at unaligned address
[ok]: BITPOS bit=1 starting at unaligned address
[ok]: BITPOS bit=0 unaligned+full word+reminder
[ok]: BITPOS bit=1 unaligned+full word+reminder
[ok]: BITPOS bit=1 returns -1 if string is all 0 bits
[ok]: BITPOS bit=0 works with intervals
[ok]: BITPOS bit=1 works with intervals
[ok]: BITPOS bit=0 changes behavior if end is given
[39/57 done]: unit/lazyfree (3 seconds)
Testing unit/tls
[ok]: BITPOS bit=1 fuzzy testing using SETBIT
[ok]: BITPOS bit=0 fuzzy testing using SETBIT
[40/57 done]: unit/tls (0 seconds)
Testing unit/tracking
[ok]: Memory efficiency with values in range 128
[ok]: maxmemory - policy volatile-lru should only remove volatile keys.
[ok]: Clients are able to enable tracking and redirect it
[ok]: The other connection is able to get invalidations
[ok]: The client is now able to disable tracking
[ok]: Clients can enable the BCAST mode with the empty prefix
[ok]: The connection gets invalidation messages about all the keys
[ok]: Clients can enable the BCAST mode with prefixes
[ok]: Adding prefixes to BCAST mode works
[ok]: Tracking NOLOOP mode in standard mode works
[ok]: Tracking NOLOOP mode in BCAST mode works
[41/57 done]: unit/bitops (7 seconds)
Testing unit/oom-score-adj
[ok]: CONFIG SET oom-score-adj works as expected
[ok]: CONFIG SET oom-score-adj handles configuration failures
[42/57 done]: unit/oom-score-adj (1 seconds)
[ok]: maxmemory - policy volatile-lfu should only remove volatile keys.
[ok]: HyperLogLog self test passes
[ok]: PFADD without arguments creates an HLL value
[ok]: Approximated cardinality after creation is zero
[ok]: PFADD returns 1 when at least 1 reg was modified
[ok]: PFADD returns 0 when no reg was modified
[ok]: PFADD works with empty string (regression)
[ok]: PFCOUNT returns approximated cardinality of set
[ok]: Tracking gets notification of expired keys
[ok]: Tracking gets notification on tracking table key eviction
[ok]: Memory efficiency with values in range 1024
[43/57 done]: unit/tracking (2 seconds)
[ok]: maxmemory - policy volatile-random should only remove volatile keys.
[ok]: HyperLogLogs are promote from sparse to dense
[ok]: maxmemory - policy volatile-ttl should only remove volatile keys.
[ok]: WAIT should not acknowledge 1 additional copy if slave is blocked
[44/57 done]: unit/wait (6 seconds)
[ok]: HyperLogLog sparse encoding stress test
[ok]: Corrupted sparse HyperLogLogs are detected: Additionl at tail
[ok]: Corrupted sparse HyperLogLogs are detected: Broken magic
[ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding
[ok]: Corrupted dense HyperLogLogs are detected: Wrong length
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 89238)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 6 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #4 as master
[ok]: PSYNC2: Set #3 to replicate from #4
[ok]: PSYNC2: Set #2 to replicate from #4
[ok]: PSYNC2: Set #1 to replicate from #2
[ok]: PSYNC2: Set #0 to replicate from #2
[ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1)
[ok]: PSYNC2: cluster is consistent after failover
[ok]: Slave should be able to synchronize with the master
[ok]: Memory efficiency with values in range 16384
[ok]: Detect write load to master
[45/57 done]: unit/memefficiency (11 seconds)
[ok]: XRANGE fuzzing
[ok]: XREVRANGE regression test for issue #5006
[ok]: XREAD streamID edge (no-blocking)
[ok]: XREAD streamID edge (blocking)
[ok]: XADD streamID edge
[ok]: Client output buffer hard limit is enforced
[ok]: XADD with MAXLEN > xlen can propagate correctly
[ok]: XADD with ~ MAXLEN can propagate correctly
[ok]: XTRIM with ~ MAXLEN can propagate correctly
[ok]: XADD can CREATE an empty stream
[ok]: XSETID can set a specific ID
[ok]: XSETID cannot SETID with smaller ID
[ok]: XSETID cannot SETID on non-existent key
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 111832)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: --- CYCLE 7 ---
[ok]: PSYNC2: [NEW LAYOUT] Set #0 as master
[ok]: PSYNC2: Set #3 to replicate from #0
[ok]: PSYNC2: Set #2 to replicate from #3
[ok]: PSYNC2: Set #4 to replicate from #2
[ok]: PSYNC2: Set #1 to replicate from #4
[ok]: Empty stream can be rewrite into AOF correctly
[ok]: PSYNC2: cluster is consistent after failover
[ok]: Stream can be rewrite into AOF correctly after XDEL lastid
[ok]: XGROUP HELP should not have unexpected options
[46/57 done]: unit/type/stream (55 seconds)
[ok]: PSYNC2: generate load while killing replication links
[ok]: PSYNC2: cluster is consistent after load (x = 135388)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4
[ok]: PSYNC2: Bring the master back again for next test
[ok]: pending querybuf: check size of pending_querybuf after set a big value
[ok]: PSYNC2: Partial resync after restart using RDB aux fields
[ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1)
[47/57 done]: unit/pendingquerybuf (20 seconds)
[ok]: Slave should be able to synchronize with the master
[ok]: PSYNC2: Replica RDB restart with EVALSHA in backlog issue #4483
[ok]: MASTER and SLAVE consistency with EVALSHA replication
[ok]: Detect write load to master
[ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0)
[48/57 done]: integration/psync2 (46 seconds)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: SLAVE can reload "lua" AUX RDB fields of duplicated scripts
[49/57 done]: integration/replication-3 (58 seconds)
[ok]: AOF rewrite during write load: RDB preamble=no
[ok]: Client output buffer soft limit is not enforced if time is not overreached
[ok]: Replication: commands with many arguments (issue #1221)
[ok]: Turning off AOF kills the background writing child if any
[ok]: Fuzzing dense/sparse encoding: Redis should always detect errors
[ok]: PFADD, PFCOUNT, PFMERGE type checking works
[ok]: PFMERGE results on the cardinality of union of sets
[ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1)
[ok]: Replication of SPOP command -- alsoPropagate() API
[ok]: AOF rewrite of list with quicklist encoding, string data
[ok]: Slave should be able to synchronize with the master
[50/57 done]: integration/replication-4 (62 seconds)
[ok]: AOF rewrite of list with quicklist encoding, int data
[ok]: Detect write load to master
[ok]: AOF rewrite of set with intset encoding, string data
[ok]: AOF rewrite of set with hashtable encoding, string data
[ok]: AOF rewrite of set with intset encoding, int data
[ok]: AOF rewrite of set with hashtable encoding, int data
[ok]: AOF rewrite of hash with ziplist encoding, string data
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb
[ok]: AOF rewrite of hash with hashtable encoding, string data
[ok]: PFCOUNT multiple-keys merge returns cardinality of union #1
[ok]: AOF rewrite of hash with ziplist encoding, int data
[ok]: AOF rewrite of hash with hashtable encoding, int data
[ok]: PFCOUNT multiple-keys merge returns cardinality of union #2
[ok]: Client output buffer soft limit is enforced if time is overreached
[ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1)
[51/57 done]: unit/obuf-limits (49 seconds)
[ok]: AOF rewrite of zset with ziplist encoding, string data
[ok]: PFDEBUG GETREG returns the HyperLogLog raw registers
[ok]: PFADD / PFCOUNT cache invalidation works
[52/57 done]: unit/hyperloglog (44 seconds)
[ok]: Slave should be able to synchronize with the master
[ok]: AOF rewrite of zset with skiplist encoding, string data
[ok]: Detect write load to master
[ok]: AOF rewrite of zset with ziplist encoding, int data
[ok]: AOF rewrite of zset with skiplist encoding, int data
[ok]: BGREWRITEAOF is delayed if BGSAVE is in progress
[ok]: BGREWRITEAOF is refused if already in progress
[53/57 done]: unit/aofrw (85 seconds)
[ok]: slave buffer are counted correctly
[ok]: GEOADD + GEORANGE randomized test
[54/57 done]: unit/geo (54 seconds)
[ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: replica buffer don't induce eviction
[55/57 done]: unit/maxmemory (67 seconds)
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled
[ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb
[ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Master stream is correctly processed while the replica has a script in -BUSY state
[ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: slave fails full sync and diskless load swapdb recovers it
[ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1)
[ok]: diskless loading short read
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: diskless no replicas drop during rdb pipe
[ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: diskless slow replicas drop during rdb pipe
[ok]: diskless fast replicas drop during rdb pipe
[ok]: diskless all replicas drop during rdb pipe
[ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1)
[56/57 done]: integration/replication-psync (181 seconds)
[ok]: replicaof right after disconnection
[57/57 done]: integration/replication (186 seconds)
Testing solo test
[57/57 done]: defrag (1 seconds)

                   The End

Execution time of different units:
  0 seconds - unit/type/incr
  0 seconds - unit/printver
  0 seconds - unit/auth
  1 seconds - unit/protocol
  1 seconds - unit/keyspace
  1 seconds - unit/quit
  3 seconds - unit/type/stream-cgroups
  1 seconds - unit/acl
  3 seconds - unit/multi
  8 seconds - unit/type/hash
  10 seconds - unit/type/set
  10 seconds - unit/scan
  11 seconds - unit/type/list
  12 seconds - unit/sort
  13 seconds - unit/type/string
  15 seconds - unit/type/zset
  16 seconds - unit/other
  16 seconds - unit/expire
  1 seconds - integration/logging
  1 seconds - integration/convert-zipmap-hash-on-load
  15 seconds - unit/latency-monitor
  10 seconds - integration/aof
  8 seconds - integration/rdb
  1 seconds - unit/pubsub
  2 seconds - unit/slowlog
  27 seconds - integration/block-repl
  32 seconds - unit/type/list-2
  1 seconds - unit/introspection
  7 seconds - unit/scripting
  1 seconds - unit/limits
  26 seconds - integration/replication-2
  37 seconds - unit/dump
  19 seconds - integration/psync2-pingoff
  6 seconds - unit/introspection-2
  39 seconds - unit/type/list-3
  23 seconds - integration/psync2-reg
  3 seconds - unit/bitfield
  18 seconds - integration/redis-cli
  3 seconds - unit/lazyfree
  0 seconds - unit/tls
  7 seconds - unit/bitops
  1 seconds - unit/oom-score-adj
  2 seconds - unit/tracking
  6 seconds - unit/wait
  11 seconds - unit/memefficiency
  55 seconds - unit/type/stream
  20 seconds - unit/pendingquerybuf
  46 seconds - integration/psync2
  58 seconds - integration/replication-3
  62 seconds - integration/replication-4
  49 seconds - unit/obuf-limits
  44 seconds - unit/hyperloglog
  85 seconds - unit/aofrw
  54 seconds - unit/geo
  67 seconds - unit/maxmemory
  181 seconds - integration/replication-psync
  186 seconds - integration/replication
  1 seconds - defrag

\o/ All tests passed without errors!

Cleanup: may take some time... OK