RedisCI

Details for run #5892 (ok)

redis-2.8-32bit (b2ab1e0)

Fri Jun 16 13:38:38 CEST 2017

@cd /ssd/ci/redis

Working dir is now '/ssd/ci/redis'

@git reset --hard

HEAD is now at b2ab1e0 Remove Lua state reference from buffers in lua_cmsgpack.

@git checkout 2.8

Already on '2.8'
Your branch is up-to-date with 'origin/2.8'.

@git pull origin 2.8

From git://github.com/antirez/redis
 * branch            2.8        -> FETCH_HEAD
Already up-to-date.

@make distclean

cd src && make distclean
make[1]: Entering directory `/ssd/ci/redis/src'
rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-dump redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html
(cd ../deps && make distclean)
make[2]: Entering directory `/ssd/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(rm -f .make-*)
make[2]: Leaving directory `/ssd/ci/redis/deps'
(rm -f .make-*)
make[1]: Leaving directory `/ssd/ci/redis/src'

@make 32bit

cd src && make 32bit
make[1]: Entering directory `/ssd/ci/redis/src'

WARNING: if it fails under Linux you probably need to install libc6-dev-i386

make CFLAGS="-m32" LDFLAGS="-m32"
make[2]: Entering directory `/ssd/ci/redis/src'
rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-dump redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html
(cd ../deps && make distclean)
make[3]: Entering directory `/ssd/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(rm -f .make-*)
make[3]: Leaving directory `/ssd/ci/redis/deps'
(rm -f .make-*)
echo STD=-std=c99 -pedantic >> .make-settings
echo WARN=-Wall -W >> .make-settings
echo OPT=-O2 >> .make-settings
echo MALLOC=jemalloc >> .make-settings
echo CFLAGS=-m32 >> .make-settings
echo LDFLAGS=-m32 >> .make-settings
echo REDIS_CFLAGS= >> .make-settings
echo REDIS_LDFLAGS= >> .make-settings
echo PREV_FINAL_CFLAGS=-std=c99 -pedantic -Wall -W -O2 -g -ggdb -m32  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -DUSE_JEMALLOC -I../deps/jemalloc/include >> .make-settings
echo PREV_FINAL_LDFLAGS=-m32  -g -ggdb -rdynamic >> .make-settings
(cd ../deps && make hiredis linenoise lua jemalloc)
make[3]: Entering directory `/ssd/ci/redis/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(rm -f .make-*)
(echo "-m32" > .make-ldflags)
(echo "-m32" > .make-cflags)
MAKE hiredis
cd hiredis && make static
make[4]: Entering directory `/ssd/ci/redis/deps/hiredis'
cc -std=c99 -pedantic -c -O3 -fPIC -m32 -Wall -W -Wstrict-prototypes -Wwrite-strings -g -ggdb  net.c
cc -std=c99 -pedantic -c -O3 -fPIC -m32 -Wall -W -Wstrict-prototypes -Wwrite-strings -g -ggdb  hiredis.c
cc -std=c99 -pedantic -c -O3 -fPIC -m32 -Wall -W -Wstrict-prototypes -Wwrite-strings -g -ggdb  sds.c
cc -std=c99 -pedantic -c -O3 -fPIC -m32 -Wall -W -Wstrict-prototypes -Wwrite-strings -g -ggdb  async.c
ar rcs libhiredis.a net.o hiredis.o sds.o async.o
make[4]: Leaving directory `/ssd/ci/redis/deps/hiredis'
MAKE linenoise
cd linenoise && make
make[4]: Entering directory `/ssd/ci/redis/deps/linenoise'
cc  -Wall -Os -g -m32 -c linenoise.c
make[4]: Leaving directory `/ssd/ci/redis/deps/linenoise'
MAKE lua
cd lua/src && make all CFLAGS="-O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32" MYLDFLAGS="-m32" AR="ar rcu"
make[4]: Entering directory `/ssd/ci/redis/deps/lua/src'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lapi.o lapi.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lcode.o lcode.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ldebug.o ldebug.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ldo.o ldo.c
ldo.c: In function 'f_parser':
ldo.c:496:7: warning: unused variable 'c' [-Wunused-variable]
   int c = luaZ_lookahead(p->z);
       ^
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ldump.o ldump.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lfunc.o lfunc.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lgc.o lgc.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o llex.o llex.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lmem.o lmem.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lobject.o lobject.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lopcodes.o lopcodes.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lparser.o lparser.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lstate.o lstate.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lstring.o lstring.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ltable.o ltable.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ltm.o ltm.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lundump.o lundump.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lvm.o lvm.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lzio.o lzio.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o strbuf.o strbuf.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o fpconv.o fpconv.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lauxlib.o lauxlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lbaselib.o lbaselib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ldblib.o ldblib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o liolib.o liolib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lmathlib.o lmathlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o loslib.o loslib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o ltablib.o ltablib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lstrlib.o lstrlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o loadlib.o loadlib.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o linit.o linit.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lua_cjson.o lua_cjson.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lua_struct.o lua_struct.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lua_cmsgpack.o lua_cmsgpack.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lua_bit.o lua_bit.c
ar rcu liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o	# DLL needs all object files
ranlib liblua.a
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o lua.o lua.c
cc -o lua -m32 lua.o liblua.a -lm 
liblua.a(loslib.o): In function `os_tmpname':
loslib.c:(.text+0x32d): warning: the use of `tmpnam' is dangerous, better use `mkstemp'
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o luac.o luac.c
cc -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -m32   -c -o print.o print.c
cc -o luac -m32 luac.o print.o liblua.a -lm 
make[4]: Leaving directory `/ssd/ci/redis/deps/lua/src'
MAKE jemalloc
cd jemalloc && ./configure --with-jemalloc-prefix=je_ --enable-cc-silence CFLAGS="-std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32" LDFLAGS="-m32"
checking for xsltproc... /usr/bin/xsltproc
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking size of void *... 4
checking size of int... 4
checking size of long... 4
checking size of intmax_t... 8
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking whether pause instruction is compilable... yes
checking whether SSE2 intrinsics is compilable... no
checking for ar... ar
checking whether __attribute__ syntax is compilable... yes
checking whether compiler supports -fvisibility=hidden... yes
checking whether compiler supports -Werror... yes
checking whether tls_model attribute is compilable... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for ld... /usr/bin/ld
checking for autoconf... /usr/bin/autoconf
checking for memalign... yes
checking for valloc... yes
checking configured backtracing method... N/A
checking for sbrk... yes
checking whether utrace(2) is compilable... no
checking whether valgrind is compilable... yes
checking STATIC_PAGE_SHIFT... 12
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
checking for _malloc_thread_cleanup... no
checking for _pthread_mutex_init_calloc_cb... no
checking for TLS... yes
checking whether a program using ffsl is compilable... yes
checking whether atomic(9) is compilable... no
checking whether Darwin OSAtomic*() is compilable... no
checking whether to force 32-bit __sync_{add,sub}_and_fetch()... no
checking whether to force 64-bit __sync_{add,sub}_and_fetch()... no
checking whether Darwin OSSpin*() is compilable... no
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/html.xsl
config.status: creating doc/manpages.xsl
config.status: creating doc/jemalloc.xml
config.status: creating include/jemalloc/jemalloc_macros.h
config.status: creating include/jemalloc/jemalloc_protos.h
config.status: creating include/jemalloc/internal/jemalloc_internal.h
config.status: creating test/test.sh
config.status: creating test/include/test/jemalloc_test.h
config.status: creating config.stamp
config.status: creating bin/jemalloc.sh
config.status: creating include/jemalloc/jemalloc_defs.h
config.status: creating include/jemalloc/internal/jemalloc_internal_defs.h
config.status: creating test/include/test/jemalloc_test_defs.h
config.status: executing include/jemalloc/internal/private_namespace.h commands
config.status: executing include/jemalloc/internal/private_unnamespace.h commands
config.status: executing include/jemalloc/internal/public_symbols.txt commands
config.status: executing include/jemalloc/internal/public_namespace.h commands
config.status: executing include/jemalloc/internal/public_unnamespace.h commands
config.status: executing include/jemalloc/internal/size_classes.h commands
config.status: executing include/jemalloc/jemalloc_protos_jet.h commands
config.status: executing include/jemalloc/jemalloc_rename.h commands
config.status: executing include/jemalloc/jemalloc_mangle.h commands
config.status: executing include/jemalloc/jemalloc_mangle_jet.h commands
config.status: executing include/jemalloc/jemalloc.h commands
===============================================================================
jemalloc version   : 3.6.0-0-g46c0af68bd248b04df75e4f92d5fb804c3d75340
library revision   : 1

CC                 : gcc
CPPFLAGS           :  -D_GNU_SOURCE -D_REENTRANT
CFLAGS             : -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -fvisibility=hidden
LDFLAGS            : -m32
EXTRA_LDFLAGS      : 
LIBS               :  -lpthread
RPATH_EXTRA        : 

XSLTPROC           : /usr/bin/xsltproc
XSLROOT            : /usr/share/xml/docbook/stylesheet/docbook-xsl

PREFIX             : /usr/local
BINDIR             : /usr/local/bin
INCLUDEDIR         : /usr/local/include
LIBDIR             : /usr/local/lib
DATADIR            : /usr/local/share
MANDIR             : /usr/local/share/man

srcroot            : 
abs_srcroot        : /ssd/ci/redis/deps/jemalloc/
objroot            : 
abs_objroot        : /ssd/ci/redis/deps/jemalloc/

JEMALLOC_PREFIX    : je_
JEMALLOC_PRIVATE_NAMESPACE
                   : je_
install_suffix     : 
autogen            : 0
experimental       : 1
cc-silence         : 1
debug              : 0
code-coverage      : 0
stats              : 1
prof               : 0
prof-libunwind     : 0
prof-libgcc        : 0
prof-gcc           : 0
tcache             : 1
fill               : 1
utrace             : 0
valgrind           : 1
xmalloc            : 0
mremap             : 0
munmap             : 0
dss                : 0
lazy_lock          : 0
tls                : 1
===============================================================================
cd jemalloc && make CFLAGS="-std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32" LDFLAGS="-m32" lib/libjemalloc.a
make[4]: Entering directory `/ssd/ci/redis/deps/jemalloc'
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/jemalloc.o src/jemalloc.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/arena.o src/arena.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/atomic.o src/atomic.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/base.o src/base.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/bitmap.o src/bitmap.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/chunk.o src/chunk.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/chunk_dss.o src/chunk_dss.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/chunk_mmap.o src/chunk_mmap.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/ckh.o src/ckh.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/ctl.o src/ctl.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/extent.o src/extent.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/hash.o src/hash.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/huge.o src/huge.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/mb.o src/mb.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/mutex.o src/mutex.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/prof.o src/prof.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/quarantine.o src/quarantine.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/rtree.o src/rtree.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/stats.o src/stats.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/tcache.o src/tcache.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/util.o src/util.c
gcc -std=gnu99 -Wall -pipe -g3 -O3 -funroll-loops -m32 -c -D_GNU_SOURCE -D_REENTRANT -Iinclude -Iinclude -o src/tsd.o src/tsd.c
ar crus lib/libjemalloc.a src/jemalloc.o src/arena.o src/atomic.o src/base.o src/bitmap.o src/chunk.o src/chunk_dss.o src/chunk_mmap.o src/ckh.o src/ctl.o src/extent.o src/hash.o src/huge.o src/mb.o src/mutex.o src/prof.o src/quarantine.o src/rtree.o src/stats.o src/tcache.o src/util.o src/tsd.o
make[4]: Leaving directory `/ssd/ci/redis/deps/jemalloc'
make[3]: Leaving directory `/ssd/ci/redis/deps'
    CC adlist.o
    CC ae.o
    CC anet.o
    CC dict.o
    CC redis.o
    CC sds.o
    CC zmalloc.o
    CC lzf_c.o
    CC lzf_d.o
    CC pqsort.o
    CC zipmap.o
    CC sha1.o
    CC ziplist.o
    CC release.o
    CC networking.o
    CC util.o
    CC object.o
    CC db.o
    CC replication.o
    CC rdb.o
    CC t_string.o
    CC t_list.o
    CC t_set.o
    CC t_zset.o
    CC t_hash.o
    CC config.o
    CC aof.o
    CC pubsub.o
    CC multi.o
    CC debug.o
    CC sort.o
    CC intset.o
    CC syncio.o
    CC migrate.o
    CC endianconv.o
    CC slowlog.o
    CC scripting.o
    CC bio.o
    CC rio.o
    CC rand.o
    CC memtest.o
    CC crc64.o
    CC bitops.o
    CC sentinel.o
    CC notify.o
    CC setproctitle.o
    CC hyperloglog.o
    CC latency.o
    CC sparkline.o
    LINK redis-server
    INSTALL redis-sentinel
    CC redis-cli.o
    LINK redis-cli
    CC redis-benchmark.o
    LINK redis-benchmark
    CC redis-check-dump.o
    LINK redis-check-dump
    CC redis-check-aof.o
    LINK redis-check-aof

Hint: It's a good idea to run 'make test' ;)

make[2]: Leaving directory `/ssd/ci/redis/src'
make[1]: Leaving directory `/ssd/ci/redis/src'

@tclsh8.5 tests/test_helper.tcl --accurate

Cleanup: may take some time... OK
Starting test server at port 11111
[ready]: 7808
Testing unit/printver
[ready]: 7810
Testing unit/auth
[ready]: 7813
Testing unit/protocol
[ready]: 7816
Testing unit/basic
[ready]: 7819
Testing unit/scan
[ready]: 7822
Testing unit/type/list
[ready]: 7827
Testing unit/type/list-2
[ready]: 7824
Testing unit/type/list-3
[ready]: 7834
Testing unit/type/set
[ready]: 7837
Testing unit/type/zset
[ready]: 7830
Testing unit/type/hash
[ready]: 7840
Testing unit/sort
[ready]: 7842
Testing unit/expire
[ready]: 7849
Testing unit/other
[ready]: 7845
Testing unit/multi
[ready]: 7853
Testing unit/quit
Testing Redis version 2.8.24 (b2ab1e01)
[ok]: DEL all keys to start with a clean DB
[ok]: SET and GET an item
[ok]: SET and GET an empty item
[ok]: DEL against a single item
[ok]: Check encoding - ziplist
[ok]: Vararg DEL
[ok]: ZSET basic ZADD and score update - ziplist
[ok]: ZSET element can't be set to NaN with ZADD - ziplist
[ok]: ZSET element can't be set to NaN with ZINCRBY
[ok]: ZINCRBY calls leading to NaN result in error
[ok]: KEYS with pattern
[ok]: SADD, SCARD, SISMEMBER, SMEMBERS basics - regular set
[ok]: ZADD - Variadic version base case
[ok]: KEYS to get all keys
[ok]: ZADD - Return value is the number of actually added items
[ok]: ZADD - Variadic version does not add nothing on single parsing err
[ok]: ZADD - Variadic version will raise error on missing arg
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation
[ok]: ZCARD basics - ziplist
[ok]: SADD, SCARD, SISMEMBER, SMEMBERS basics - intset
[ok]: DBSIZE
[ok]: SADD against non set
[ok]: ZREM removes key after last element is removed
[ok]: ZREM variadic version
[ok]: SADD a non-integer against an intset
[ok]: ZREM variadic version -- remove elements after key deletion
[ok]: DEL all keys
[ok]: SADD an integer larger than 64 bits
[ok]: Ziplist: SORT BY key
[ok]: Ziplist: SORT BY key with limit
[ok]: Ziplist: SORT BY hash field
[ok]: ZRANGE basics - ziplist
[ok]: ZREVRANGE basics - ziplist
[ok]: ZRANK/ZREVRANK basics - ziplist
[ok]: ZRANK - after deletion - ziplist
[ok]: ZINCRBY - can create a new sorted set - ziplist
[ok]: ZINCRBY - increment and decrement - ziplist
[ok]: HSET/HLEN - Small hash creation
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics
[ok]: Is the small hash encoded with a ziplist?
[ok]: ZRANGEBYSCORE with WITHSCORES
[ok]: ZRANGEBYSCORE with LIMIT
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES
[ok]: SCAN basic
[ok]: Explicit regression for a list bug
[ok]: ZRANGEBYSCORE with non-value min or max
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZCOUNT basics
[ok]: ZRANGEBYSLEX with LIMIT
[ok]: ZRANGEBYLEX with invalid lex range specifiers
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - ziplist
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - regular list
[ok]: R/LPOP against empty list
[ok]: ZREMRANGEBYSCORE basics
[ok]: ZREMRANGEBYSCORE with non-value min or max
[ok]: Variadic RPUSH/LPUSH
[ok]: DEL a list - ziplist
[ok]: DEL a list - regular list
[ok]: BLPOP, BRPOP: single existing list - linkedlist
[ok]: ZREMRANGEBYRANK basics
[ok]: BLPOP, BRPOP: multiple existing lists - linkedlist
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - ziplist
[ok]: ZUNIONSTORE with empty set - ziplist
[ok]: BLPOP, BRPOP: second list has an entry - linkedlist
[ok]: ZUNIONSTORE basics - ziplist
[ok]: BRPOPLPUSH - linkedlist
[ok]: ZUNIONSTORE with weights - ziplist
[ok]: ZUNIONSTORE with a regular set and weights - ziplist
[ok]: ZUNIONSTORE with AGGREGATE MIN - ziplist
[ok]: BLPOP, BRPOP: single existing list - ziplist
[ok]: ZUNIONSTORE with AGGREGATE MAX - ziplist
[ok]: ZINTERSTORE basics - ziplist
[ok]: ZINTERSTORE with weights - ziplist
[ok]: BLPOP, BRPOP: multiple existing lists - ziplist
[ok]: BLPOP, BRPOP: second list has an entry - ziplist
[ok]: ZINTERSTORE with a regular set and weights - ziplist
[ok]: ZINTERSTORE with AGGREGATE MIN - ziplist
[ok]: ZINTERSTORE with AGGREGATE MAX - ziplist
[ok]: SADD overflows the maximum allowed integers in an intset
[ok]: BRPOPLPUSH - ziplist
[ok]: SCAN COUNT
[ok]: ZUNIONSTORE with +inf/-inf scores - ziplist
[ok]: Variadic SADD
[ok]: BLPOP, LPUSH + DEL should not awake blocked client
[ok]: ZUNIONSTORE with NaN weights ziplist
[ok]: ZINTERSTORE with +inf/-inf scores - ziplist
[ok]: ZINTERSTORE with NaN weights ziplist
[ok]: Check encoding - skiplist
[ok]: ZSET basic ZADD and score update - skiplist
[ok]: ZSET element can't be set to NaN with ZADD - skiplist
[ok]: ZSET element can't be set to NaN with ZINCRBY
[ok]: ZINCRBY calls leading to NaN result in error
[ok]: ZADD - Variadic version base case
[ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client
[ok]: ZADD - Return value is the number of actually added items
[ok]: ZADD - Variadic version does not add nothing on single parsing err
[ok]: BLPOP with same key multiple times should work (issue #801)
[ok]: ZADD - Variadic version will raise error on missing arg
[ok]: EXPIRE - set timeouts multiple times
[ok]: EXPIRE - It should be still possible to read 'x'
[ok]: MULTI/EXEC is isolated from the point of view of BLPOP
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation
[ok]: ZCARD basics - skiplist
[ok]: BLPOP with variadic LPUSH
[ok]: ZREM removes key after last element is removed
[ok]: Handle an empty query
[ok]: ZREM variadic version
[ok]: ZREM variadic version -- remove elements after key deletion
[ok]: SCAN MATCH
[ok]: ZRANGE basics - skiplist
[ok]: AUTH fails if there is no password configured server side
[ok]: SSCAN with encoding intset
[ok]: ZREVRANGE basics - skiplist
[ok]: ZRANK/ZREVRANK basics - skiplist
[ok]: SSCAN with encoding hashtable
[ok]: ZRANK - after deletion - skiplist
[ok]: ZINCRBY - can create a new sorted set - skiplist
[ok]: SAVE - make sure there are all the types as values
[ok]: HSCAN with encoding ziplist
[ok]: ZINCRBY - increment and decrement - skiplist
[ok]: QUIT returns OK
[ok]: Pipelined commands after QUIT must not be executed
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics
[ok]: ZRANGEBYSCORE with WITHSCORES
[ok]: Pipelined commands after QUIT that exceed read buffer size
[ok]: ZRANGEBYSCORE with LIMIT
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES
[ok]: ZRANGEBYSCORE with non-value min or max
[ok]: MUTLI / EXEC basics
[ok]: DISCARD
[ok]: Nested MULTI are not allowed
[ok]: MULTI where commands alter argc/argv
[ok]: WATCH inside MULTI is not allowed
[ok]: EXEC fails if there are errors while queueing commands #1
[ok]: EXEC fails if there are errors while queueing commands #2
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZCOUNT basics
[ok]: If EXEC aborts, the client MULTI state is cleared
[ok]: EXEC works on WATCHed key not modified
[ok]: EXEC fail on WATCHed key modified (1 key of 1 watched)
[ok]: EXEC fail on WATCHed key modified (1 key of 5 watched)
[ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty
[ok]: After successful EXEC key is no longer watched
[ok]: ZRANGEBYSLEX with LIMIT
[ok]: ZRANGEBYLEX with invalid lex range specifiers
[ok]: After failed EXEC key is no longer watched
[ok]: It is possible to UNWATCH
[ok]: UNWATCH when there is nothing watched works as expected
[ok]: FLUSHALL is able to touch the watched keys
[ok]: Negative multibulk length
[ok]: Out of range multibulk length
[ok]: FLUSHALL does not touch non affected keys
[ok]: Wrong multibulk payload header
[ok]: FLUSHDB is able to touch the watched keys
[ok]: Negative multibulk payload length
[ok]: FLUSHDB does not touch non affected keys
[ok]: WATCH is able to remember the DB a key belongs to
[ok]: Out of range multibulk payload length
[ok]: WATCH will consider touched keys target of EXPIRE
[ok]: Non-number multibulk payload length
[ok]: Multi bulk request not followed by bulk arguments
[ok]: Generic wrong number of args
[ok]: Unbalanced number of quotes
[ok]: ZREMRANGEBYSCORE basics
[ok]: ZREMRANGEBYSCORE with non-value min or max
[ok]: ZREMRANGEBYRANK basics
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist
[ok]: ZUNIONSTORE with empty set - skiplist
[ok]: ZUNIONSTORE basics - skiplist
[ok]: ZUNIONSTORE with weights - skiplist
[ok]: ZUNIONSTORE with a regular set and weights - skiplist
[ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist
[1/36 done]: unit/printver (0 seconds)
Testing unit/aofrw
[ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist
[ok]: ZINTERSTORE basics - skiplist
[ok]: ZINTERSTORE with weights - skiplist
[ok]: ZINTERSTORE with a regular set and weights - skiplist
[ok]: ZINTERSTORE with AGGREGATE MIN - skiplist
[ok]: ZINTERSTORE with AGGREGATE MAX - skiplist
[ok]: ZUNIONSTORE with +inf/-inf scores - skiplist
[ok]: ZUNIONSTORE with NaN weights skiplist
[ok]: ZINTERSTORE with +inf/-inf scores - skiplist
[ok]: ZINTERSTORE with NaN weights skiplist
[ok]: ZINTERSTORE regression with two sets, intset+hashtable
[ok]: ZUNIONSTORE regression, should not create NaN in scores
[ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets
[ok]: Very big payload in GET/SET
[ok]: HSCAN with encoding hashtable
[ok]: ZSCAN with encoding ziplist
[ok]: HSET/HLEN - Big hash creation
[ok]: Is the big hash encoded with an hash table?
[ok]: HGET against the small hash
[2/36 done]: unit/quit (0 seconds)
Testing integration/replication
[ok]: Protocol desync regression test #1
[ok]: Set encoding after DEBUG RELOAD
[ok]: SREM basics - regular set
[ok]: SREM basics - intset
[ok]: SREM with multiple arguments
[ok]: SREM variadic version with more args needed to destroy the key
[ok]: ZUNIONSTORE result is sorted
[ok]: Protocol desync regression test #2
[ok]: ZSCAN with encoding skiplist
[ok]: ZSCORE - ziplist
[ok]: HGET against the big hash
[ok]: Generated sets must be encoded as hashtable
[ok]: SINTER with two sets - hashtable
[ok]: HGET against non existing key
[ok]: SINTERSTORE with two sets - hashtable
[ok]: HSET in update and insert mode
[ok]: HSETNX target key missing - small hash
[ok]: HSETNX target key exists - small hash
[ok]: HSETNX target key missing - big hash
[ok]: HSETNX target key exists - big hash
[ok]: HMSET wrong number of args
[ok]: HMSET - small hash
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - hashtable
[ok]: SCAN guarantees check under write load
[ok]: SSCAN with integer encoded object (issue #1345)
[ok]: SSCAN with PATTERN
[ok]: HSCAN with PATTERN
[ok]: ZSCAN with PATTERN
[ok]: SUNION with two sets - hashtable
[ok]: Linked list: SORT BY key
[ok]: Linked list: SORT BY key with limit
[ok]: SUNIONSTORE with two sets - hashtable
[ok]: SINTER against three sets - hashtable
[ok]: SINTERSTORE with three sets - hashtable
[ok]: SUNION with non existing keys - hashtable
[ok]: SDIFF with two sets - hashtable
[ok]: SDIFF with three sets - hashtable
[ok]: SDIFFSTORE with three sets - hashtable
[ok]: ZSCORE after a DEBUG RELOAD - ziplist
[ok]: Linked list: SORT BY hash field
[ok]: HMSET - big hash
[ok]: HMGET against non existing key and fields
[ok]: HMGET against wrong type
[ok]: HMGET - small hash
[ok]: ZSET sorting stresser - ziplist
[ok]: Protocol desync regression test #3
[ok]: ZSCAN scores: regression test for issue #2175
[ok]: HMGET - big hash
[ok]: HKEYS - small hash
[ok]: Generated sets must be encoded as intset
[ok]: SINTER with two sets - intset
[ok]: SINTERSTORE with two sets - intset
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset
[ok]: AUTH fails when a wrong password is given
[ok]: Arbitrary command gives an error when AUTH is required
[ok]: AUTH succeeds when the right password is given
[ok]: Once AUTH succeeded we can actually send commands to the server
[ok]: SUNION with two sets - intset
[ok]: HKEYS - big hash
[ok]: HVALS - small hash
[ok]: SUNIONSTORE with two sets - intset
[ok]: SINTER against three sets - intset
[ok]: SINTERSTORE with three sets - intset
[ok]: HVALS - big hash
[ok]: HGETALL - small hash
[ok]: SUNION with non existing keys - intset
[ok]: SDIFF with two sets - intset
[ok]: SDIFF with three sets - intset
[ok]: SDIFFSTORE with three sets - intset
[ok]: SDIFF with first set empty
[ok]: SDIFF with same set two times
[ok]: HGETALL - big hash
[ok]: HDEL and return value
[ok]: HDEL - more than a single value
[ok]: HDEL - hash becomes empty before deleting all specified fields
[ok]: HEXISTS
[ok]: Is a ziplist encoded Hash promoted on big payload?
[ok]: HINCRBY against non existing database key
[ok]: HINCRBY against non existing hash key
[ok]: HINCRBY against hash key created by hincrby itself
[ok]: HINCRBY against hash key originally set with HSET
[ok]: HINCRBY over 32bit value
[ok]: HINCRBY over 32bit value with over 32bit increment
[ok]: HINCRBY fails against hash value with spaces (left)
[ok]: HINCRBY fails against hash value with spaces (right)
[ok]: HINCRBY can detect overflows
[ok]: HINCRBYFLOAT against non existing database key
[ok]: HINCRBYFLOAT against non existing hash key
[ok]: HINCRBYFLOAT against hash key created by hincrby itself
[ok]: HINCRBYFLOAT against hash key originally set with HSET
[ok]: HINCRBYFLOAT over 32bit value
[ok]: HINCRBYFLOAT over 32bit value with over 32bit increment
[ok]: HINCRBYFLOAT fails against hash value with spaces (left)
[ok]: HINCRBYFLOAT fails against hash value with spaces (right)
[ok]: Hash ziplist regression test for large keys
[3/36 done]: unit/auth (0 seconds)
Testing integration/replication-2
[4/36 done]: unit/scan (0 seconds)
Testing integration/replication-3
[ok]: Hash fuzzing #1 - 10 fields
[ok]: Hash fuzzing #2 - 10 fields
[ok]: Regression for a crash with blocking ops and pipelining
[5/36 done]: unit/protocol (1 seconds)
Testing integration/replication-4
[ok]: BRPOPLPUSH with zero timeout should block indefinitely
[ok]: WATCH will not consider touched expired keys
[ok]: DISCARD should clear the WATCH dirty flag on the client
[ok]: DISCARD should UNWATCH all the keys
[ok]: MULTI / EXEC is propagated correctly (single write command)
[ok]: MULTI / EXEC is propagated correctly (empty transaction)
[ok]: MULTI / EXEC is propagated correctly (read-only commands)
[ok]: Slave enters handshake
[ok]: MULTI / EXEC is propagated correctly (write command, no effect)
[ok]: First server should have role slave after SLAVEOF
[ok]: First server should have role slave after SLAVEOF
[ok]: If min-slaves-to-write is honored, write is accepted
[ok]: No write if min-slaves-to-write is < attached slaves
[ok]: If min-slaves-to-write is honored, write is accepted (again)
[6/36 done]: unit/multi (2 seconds)
Testing integration/replication-psync
[ok]: First server should have role slave after SLAVEOF
[ok]: BRPOPLPUSH with a client BLPOPing the target list
[ok]: BRPOPLPUSH with wrong source type
[ok]: EXPIRE - After 2.1 seconds the key should no longer be here
[ok]: EXPIRE - write on expire should work
[ok]: EXPIREAT - Check for EXPIRE alike behavior
[ok]: SETEX - Set + Expire combo operation. Check for TTL
[ok]: SETEX - Check value
[ok]: SETEX - Overwrite old key
[ok]: Hash fuzzing #1 - 512 fields
[ok]: BRPOPLPUSH with wrong destination type
[ok]: BRPOPLPUSH maintains order of elements after failure
[ok]: BRPOPLPUSH with multiple blocked clients
[ok]: Linked BRPOPLPUSH
[ok]: Circular BRPOPLPUSH
[ok]: Self-referential BRPOPLPUSH
[ok]: BRPOPLPUSH inside a transaction
[ok]: PUSH resulting from BRPOPLPUSH affect WATCH
[ok]: BRPOPLPUSH does not affect WATCH while still blocked
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: SETEX - Wait for the key to expire
[ok]: SETEX - Wrong time parameter
[ok]: PERSIST can undo an EXPIRE
[ok]: PERSIST returns 0 against non existing or non volatile keys
[ok]: Test replication partial resync: no reconnection, just sync (diskless: no, reconnect: 0)
[ok]: LTRIM stress testing - linkedlist
[ok]: Hash fuzzing #2 - 512 fields
[ok]: Very big payload random access
[ok]: BRPOPLPUSH timeout
[ok]: BLPOP when new key is moved into place
[ok]: BLPOP when result key is created by SORT..STORE
[ok]: BLPOP: with single empty list argument
[ok]: BLPOP: with negative timeout
[ok]: BLPOP: with non-integer timeout
[ok]: EXPIRE pricision is now the millisecond
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: BLPOP: with zero timeout should block indefinitely
[ok]: BLPOP: second argument is not a list
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires
[ok]: TTL returns tiem to live in seconds
[ok]: PTTL returns time to live in milliseconds
[ok]: TTL / PTTL return -1 if key has no expire
[ok]: TTL / PTTL return -2 if key does not exit
[ok]: Big Linked list: SORT BY key
[ok]: Big Linked list: SORT BY key with limit
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: Stress test the hash ziplist -> hashtable encoding conversion
[7/36 done]: unit/type/hash (7 seconds)
Testing integration/aof
[ok]: Test replication with parallel clients writing in differnet DBs
[ok]: BLPOP: timeout
[ok]: BLPOP: arguments are empty
[ok]: BRPOP: with single empty list argument
[ok]: BRPOP: with negative timeout
[ok]: BRPOP: with non-integer timeout
[ok]: Unfinished MULTI: Server should start if load-truncated is yes
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - ziplist
[ok]: No write if min-slaves-max-lag is > of the slave lag
[ok]: min-slaves-to-write is ignored by slaves
[ok]: ZSETs skiplist implementation backlink consistency test - ziplist
[ok]: Redis should actively expire keys incrementally
[ok]: Short read: Server should start if load-truncated is yes
[ok]: Truncated AOF loaded: we expect foo to be equal to 5
[ok]: Append a new command after loading an incomplete AOF
[ok]: LTRIM stress testing - ziplist
[ok]: SET 10000 numeric keys and access all them in reverse order
[ok]: DBSIZE should be 10101 now
[ok]: INCR against non existing key
[ok]: INCR against key created by incr itself
[ok]: INCR against key originally set with SET
[ok]: INCR over 32bit value
[ok]: INCRBY over 32bit value with over 32bit increment
[ok]: INCR fails against key with spaces (left)
[ok]: INCR fails against key with spaces (right)
[ok]: INCR fails against key with spaces (both)
[ok]: INCR fails against a key holding a list
[ok]: DECRBY over 32bit value with over 32bit increment, negative res
[ok]: INCRBYFLOAT against non existing key
[ok]: INCRBYFLOAT against key originally set with SET
[ok]: INCRBYFLOAT over 32bit value
[ok]: INCRBYFLOAT over 32bit value with over 32bit increment
[ok]: INCRBYFLOAT fails against key with spaces (left)
[ok]: INCRBYFLOAT fails against key with spaces (right)
[ok]: INCRBYFLOAT fails against key with spaces (both)
[ok]: INCRBYFLOAT fails against a key holding a list
[ok]: INCRBYFLOAT does not allow NaN or Infinity
[ok]: INCRBYFLOAT decrement
[ok]: SETNX target key missing
[ok]: SETNX target key exists
[ok]: SETNX against not-expired volatile key
[ok]: Short read + command: Server should start
[ok]: Truncated AOF loaded: we expect foo to be equal to 6 now
[ok]: BRPOP: with zero timeout should block indefinitely
[ok]: BRPOP: second argument is not a list
[ok]: Big Linked list: SORT BY hash field
[ok]: Intset: SORT BY key
[ok]: Intset: SORT BY key with limit
[ok]: Intset: SORT BY hash field
[8/36 done]: unit/type/list-2 (9 seconds)
Testing integration/rdb
[ok]: Bad format: Server should have logged an error
[ok]: Redis should lazy expire keys
[ok]: RDB encoding loading test
[ok]: SDIFF fuzzing
[ok]: SINTER against non-set should throw error
[ok]: SUNION against non-set should throw error
[ok]: SINTER should handle non existing key as empty
[ok]: SINTER with same integer elements but different encoding
[ok]: SINTERSTORE against non existing keys should delete dstkey
[ok]: SUNIONSTORE against non existing keys should delete dstkey
[ok]: SPOP basics - hashtable
[ok]: SRANDMEMBER - hashtable
[ok]: SPOP basics - intset
[ok]: SRANDMEMBER - intset
[ok]: SRANDMEMBER with  against non existing key
[ok]: ZSETs ZRANK augmented skip list stress testing - ziplist
[ok]: Unfinished MULTI: Server should have logged an error
[ok]: SRANDMEMBER with  - hashtable
[ok]: SRANDMEMBER with  - intset
[ok]: SMOVE basics - from regular set to intset
[ok]: SMOVE basics - from intset to regular set
[ok]: SMOVE non existing key
[ok]: SMOVE non existing src set
[ok]: SMOVE from regular set to non existing destination set
[ok]: SMOVE from intset to non existing destination set
[ok]: SMOVE wrong src key type
[ok]: SMOVE wrong dst key type
[ok]: SMOVE with identical source and destination
[ok]: Hash table: SORT BY key
[ok]: Hash table: SORT BY key with limit
[ok]: ZSCORE - skiplist
[ok]: Hash table: SORT BY hash field
[ok]: Short read: Server should have logged an error
[ok]: Server started empty with non-existing RDB file
[ok]: Short read: Utility should confirm the AOF is not valid
[ok]: First server should have role slave after SLAVEOF
[ok]: With min-slaves-to-write (1,3): master should be writable
[ok]: With min-slaves-to-write (2,3): master should not be writable
[ok]: Short read: Utility should be able to fix the AOF
[ok]: ZSCORE after a DEBUG RELOAD - skiplist
[ok]: Fixed AOF: Server should have been started
[ok]: Fixed AOF: Keyspace should contain values that were parseable
[ok]: EXPIRE should not resurrect keys (issue #1026)
[ok]: 5 keys in, 5 keys out
[ok]: ZSET sorting stresser - skiplist
[ok]: Server started empty with empty RDB file
[9/36 done]: unit/expire (10 seconds)
Testing integration/convert-zipmap-hash-on-load
[ok]: AOF+SPOP: Server should have been started
[ok]: AOF+SPOP: Set should have 1 member
[ok]: BRPOP: timeout
[ok]: BRPOP: arguments are empty
[ok]: BLPOP inside a transaction
[ok]: LPUSHX, RPUSHX - generic
[ok]: LPUSHX, RPUSHX - linkedlist
[ok]: LINSERT - linkedlist
[ok]: LPUSHX, RPUSHX - ziplist
[ok]: LINSERT - ziplist
[ok]: LINSERT raise error on bad syntax
[ok]: RDB load zipmap hash: converts to ziplist
[ok]: Server should not start if RDB is corrupted
[10/36 done]: integration/rdb (2 seconds)
Testing unit/pubsub
[ok]: LPUSHX, RPUSHX convert from ziplist to list
[ok]: AOF+EXPIRE: Server should have been started
[ok]: LINSERT convert from ziplist to list
[ok]: AOF+EXPIRE: List should be empty
[ok]: Pub/Sub PING
[ok]: PUBLISH/SUBSCRIBE basics
[ok]: PUBLISH/SUBSCRIBE with two clients
[ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments
[ok]: SUBSCRIBE to one channel more than once
[ok]: UNSUBSCRIBE from non-subscribed channels
[ok]: PUBLISH/PSUBSCRIBE basics
[ok]: PUBLISH/PSUBSCRIBE with two clients
[ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments
[ok]: PUNSUBSCRIBE from non-subscribed channels
[ok]: NUMSUB returns numbers, not strings (#1561)
[ok]: Mix SUBSCRIBE and PSUBSCRIBE
[ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply
[ok]: Keyspace notifications: we receive keyspace notifications
[ok]: Keyspace notifications: we receive keyevent notifications
[ok]: Keyspace notifications: we can receive both kind of events
[ok]: Keyspace notifications: we are able to mask events
[ok]: Keyspace notifications: general events test
[ok]: Keyspace notifications: list events test
[ok]: Keyspace notifications: set events test
[ok]: Keyspace notifications: zset events test
[ok]: Keyspace notifications: hash events test
[ok]: LINDEX consistency test - ziplist
[ok]: Keyspace notifications: expired events (triggered expire)
[ok]: LINDEX random access - ziplist
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded
[ok]: Keyspace notifications: expired events (background expire)
[ok]: Keyspace notifications: evicted events
[ok]: Keyspace notifications: test CONFIG GET/SET of event flags
[ok]: Check if list is still ok after a DEBUG RELOAD - ziplist
[ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1
[ok]: LINDEX consistency test - linkedlist
[11/36 done]: unit/pubsub (0 seconds)
Testing unit/slowlog
[ok]: LINDEX random access - linkedlist
[ok]: Slave is able to detect timeout during handshake
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded
[12/36 done]: integration/aof (5 seconds)
Testing unit/scripting
[ok]: SLOWLOG - check that it starts with an empty log
[ok]: Check if list is still ok after a DEBUG RELOAD - linkedlist
[ok]: LLEN against non-list value error
[ok]: LLEN against non existing key
[ok]: LINDEX against non-list value error
[ok]: LINDEX against non existing key
[ok]: LPUSH against non-list value error
[ok]: RPUSH against non-list value error
[ok]: RPOPLPUSH base case - linkedlist
[ok]: RPOPLPUSH with the same list as src and dst - linkedlist
[ok]: RPOPLPUSH with linkedlist source and existing target linkedlist
[ok]: RPOPLPUSH with linkedlist source and existing target ziplist
[ok]: RPOPLPUSH base case - ziplist
[ok]: RPOPLPUSH with the same list as src and dst - ziplist
[ok]: RPOPLPUSH with ziplist source and existing target linkedlist
[ok]: RPOPLPUSH with ziplist source and existing target ziplist
[ok]: RPOPLPUSH against non existing key
[ok]: RPOPLPUSH against non list src key
[ok]: RPOPLPUSH against non list dst key
[ok]: RPOPLPUSH against non existing src key
[ok]: Basic LPOP/RPOP - linkedlist
[ok]: Basic LPOP/RPOP - ziplist
[ok]: LPOP/RPOP against non list value
[ok]: Mass RPOP/LPOP - ziplist
[ok]: EVAL - Does Lua interpreter replies to our requests?
[ok]: EVAL - Lua integer -> Redis protocol type conversion
[ok]: EVAL - Lua string -> Redis protocol type conversion
[ok]: EVAL - Lua true boolean -> Redis protocol type conversion
[ok]: EVAL - Lua false boolean -> Redis protocol type conversion
[ok]: EVAL - Lua status code reply -> Redis protocol type conversion
[ok]: EVAL - Lua error reply -> Redis protocol type conversion
[ok]: EVAL - Lua table -> Redis protocol type conversion
[ok]: EVAL - Are the KEYS and ARGV arrays populated correctly?
[ok]: EVAL - is Lua able to call Redis API?
[ok]: EVALSHA - Can we call a SHA1 if already defined?
[ok]: EVALSHA - Can we call a SHA1 in uppercase?
[ok]: EVALSHA - Do we get an error on invalid SHA1?
[ok]: EVALSHA - Do we get an error on non defined SHA1?
[ok]: EVAL - Redis integer -> Lua type conversion
[ok]: EVAL - Redis bulk -> Lua type conversion
[ok]: EVAL - Redis multi bulk -> Lua type conversion
[ok]: EVAL - Redis status reply -> Lua type conversion
[ok]: EVAL - Redis error reply -> Lua type conversion
[ok]: EVAL - Redis nil bulk reply -> Lua type conversion
[ok]: EVAL - Is the Lua client using the currently selected DB?
[ok]: EVAL - SELECT inside Lua should not affect the caller
[ok]: EVAL - Scripts can't run certain commands
[ok]: EVAL - Scripts can't run certain commands
[ok]: EVAL - No arguments to redis.call/pcall is considered an error
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1)
[ok]: EVAL - JSON numeric decoding
[ok]: EVAL - JSON string decoding
[ok]: EVAL - cmsgpack can pack double?
[ok]: EVAL - cmsgpack can pack negative int64?
[ok]: EVAL - cmsgpack can pack and unpack circular references?
[ok]: EVAL - Numerical sanity check from bitop
[ok]: EVAL - Verify minimal bitop functionality
[ok]: SCRIPTING FLUSH - is able to clear the scripts cache?
[ok]: SLOWLOG - only logs commands taking more time than specified
[ok]: SCRIPT EXISTS - can detect already defined scripts?
[ok]: SCRIPT LOAD - is able to register scripts in the scripting cache
[ok]: In the context of Lua the output of random commands gets ordered
[ok]: SORT is normally not alpha re-ordered for the scripting engine
[ok]: SORT BY  output gets ordered for scripting
[ok]: SORT BY  with GET gets ordered for scripting
[ok]: redis.sha1hex() implementation
[ok]: Globals protection reading an undeclared global variable
[ok]: Globals protection setting an undeclared global*
[ok]: Test an example script DECR_IF_GT
[ok]: Scripting engine resets PRNG at every script execution
[ok]: Scripting engine PRNG can be seeded correctly
[ok]: SLOWLOG - max entries is correctly handled
[ok]: SLOWLOG - GET optional argument to limit output len works
[ok]: SLOWLOG - RESET subcommand works
[13/36 done]: integration/convert-zipmap-hash-on-load (2 seconds)
Testing unit/maxmemory
[ok]: Mass RPOP/LPOP - linkedlist
[ok]: LRANGE basics - linkedlist
[ok]: LRANGE inverted indexes - linkedlist
[ok]: LRANGE out of range indexes including the full list - linkedlist
[ok]: LRANGE out of range negative end index - linkedlist
[ok]: LRANGE basics - ziplist
[ok]: LRANGE inverted indexes - ziplist
[ok]: LRANGE out of range indexes including the full list - ziplist
[ok]: LRANGE out of range negative end index - ziplist
[ok]: LRANGE against non existing key
[ok]: LTRIM basics - linkedlist
[ok]: LTRIM out of range negative end index - linkedlist
[ok]: LTRIM basics - ziplist
[ok]: LTRIM out of range negative end index - ziplist
[ok]: LSET - linkedlist
[ok]: LSET out of range index - linkedlist
[ok]: LSET - ziplist
[ok]: LSET out of range index - ziplist
[ok]: LSET against non existing key
[ok]: LSET against non list value
[ok]: LREM remove all the occurrences - linkedlist
[ok]: LREM remove the first occurrence - linkedlist
[ok]: LREM remove non existing element - linkedlist
[ok]: LREM starting from tail with negative count - linkedlist
[ok]: LREM starting from tail with negative count (2) - linkedlist
[ok]: LREM deleting objects that may be int encoded - linkedlist
[ok]: LREM remove all the occurrences - ziplist
[ok]: LREM remove the first occurrence - ziplist
[ok]: LREM remove non existing element - ziplist
[ok]: LREM starting from tail with negative count - ziplist
[ok]: LREM starting from tail with negative count (2) - ziplist
[ok]: LREM deleting objects that may be int encoded - ziplist
[ok]: SETNX against expired volatile key
[ok]: SLOWLOG - logged entry sanity check
[ok]: SLOWLOG - commands with too many arguments are trimmed
[ok]: SLOWLOG - too long arguments are trimmed
[ok]: intsets implementation stress testing
[ok]: Without maxmemory small integers are shared
[ok]: With maxmemory and non-LRU policy integers are still shared
[ok]: With maxmemory and LRU policy integers are not shared
[ok]: Test replication partial resync: ok psync (diskless: no, reconnect: 1)
[ok]: SLOWLOG - EXEC is not logged, just executed commands
[14/36 done]: unit/type/set (12 seconds)
Testing unit/introspection
[ok]: FUZZ stresser with data model binary
[15/36 done]: unit/slowlog (2 seconds)
Testing unit/limits
[ok]: CLIENT LIST
[ok]: MONITOR can log executed commands
[ok]: MONITOR can log commands issued by the scripting engine
[ok]: CLIENT GETNAME should return NIL if name is not assigned
[ok]: CLIENT LIST shows empty fields for unassigned names
[ok]: CLIENT SETNAME does not accept spaces
[ok]: CLIENT SETNAME can assign a name to this connection
[ok]: CLIENT SETNAME can change the name of an existing connection
[ok]: After CLIENT SETNAME, connection can still be closed
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-random)
[16/36 done]: unit/introspection (1 seconds)
Testing unit/obuf-limits
[ok]: EVAL does not leak in the Lua stack
[ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds
[ok]: EVAL processes writes from AOF in read-only slaves
[ok]: We can call scripts rewriting client->argv from Lua
[ok]: Call Redis command with many args from Lua (issue #1764)
[ok]: Number conversion precision test (issue #1118)
[ok]: String containing number precision test (regression of issue #1118)
[ok]: Verify negative arg count is error instead of crash (issue #1842)
[ok]: Correct handling of reused argv (issue #1939)
[ok]: Set instance A as slave of B
[ok]: BRPOPLPUSH replication, when blocking against empty list
[17/36 done]: unit/type/list (13 seconds)
Testing unit/dump
[ok]: DEL against expired key
[ok]: EXISTS
[ok]: Zero length value in key. SET/GET/EXISTS
[ok]: Commands pipelining
[ok]: Non existing command
[ok]: RENAME basic usage
[ok]: RENAME source key should no longer exist
[ok]: RENAME against already existing key
[ok]: RENAMENX basic usage
[ok]: RENAMENX against already existing key
[ok]: RENAMENX against already existing key (2)
[ok]: RENAME against non existing source key
[ok]: RENAME where source and dest key is the same
[ok]: RENAME with volatile key, should move the TTL as well
[ok]: RENAME with volatile key, should not inherit TTL of target key
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru)
[ok]: DUMP / RESTORE are able to serialize / unserialize a simple key
[ok]: RESTORE can set an arbitrary expire to the materialized key
[ok]: RESTORE can set an expire that overflows a 32 bit integer
[ok]: RESTORE returns an error of the key already exists
[ok]: DUMP of non existing key returns nil
[ok]: With min-slaves-to-write: master not writable with lagged slave
[ok]: maxmemory - is the memory limit honoured? (policy volatile-lru)
[ok]: MIGRATE is able to migrate a key between two instances
[ok]: Check if maxclients works refusing connections
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL
[18/36 done]: unit/limits (1 seconds)
Testing unit/bitops
[ok]: BRPOPLPUSH replication, list exists
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: BITCOUNT returns 0 against non existing key
[ok]: BITCOUNT against test vector #1
[ok]: BITCOUNT against test vector #2
[ok]: BITCOUNT against test vector #3
[ok]: BITCOUNT against test vector #4
[ok]: BITCOUNT against test vector #5
[ok]: MIGRATE propagates TTL correctly
[ok]: Big Hash table: SORT BY key
[ok]: Timedout script link is still usable after Lua returns
[ok]: Big Hash table: SORT BY key with limit
[ok]: BLPOP followed by role change, issue #2473
[ok]: First server should have role slave after SLAVEOF
[ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL
[ok]: SHUTDOWN NOSAVE can kill a timedout script anyway
[ok]: maxmemory - is the memory limit honoured? (policy volatile-random)
[ok]: Before the slave connects we issue two EVAL commands
[ok]: BITCOUNT fuzzing without start/end
[ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl)
[ok]: Second server should have role master at first
[ok]: SLAVEOF should start with link status "down"
[ok]: The role should immediately be changed to "slave"
[ok]: Connect a slave to the main instance
[ok]: Now use EVALSHA against the master, with both SHAs
[ok]: If EVALSHA was replicated as EVAL, 'x' should be '4'
[ok]: Replication of script multiple pushes to list with BLPOP
[ok]: EVALSHA replication when first call is readonly
[ok]: Lua scripts using SELECT are replicated correctly
[ok]: Big Hash table: SORT BY hash field
[ok]: SORT GET #
[ok]: SORT GET 
[ok]: SORT GET (key and hash) with sanity check
[ok]: SORT BY key STORE
[ok]: SORT BY hash field STORE
[ok]: SORT DESC
[ok]: SORT ALPHA against integer encoded strings
[ok]: SORT sorted set
[ok]: SORT sorted set BY nosort should retain ordering
[ok]: SORT sorted set BY nosort + LIMIT
[ok]: BITCOUNT fuzzing with start/end
[ok]: BITCOUNT with start, end
[ok]: BITCOUNT syntax error #1
[ok]: BITCOUNT regression test for github issue #582
[ok]: SORT sorted set BY nosort works as expected from scripts
[ok]: BITCOUNT misaligned prefix
[ok]: SORT sorted set: +inf and -inf handling
[ok]: BITCOUNT misaligned prefix + full words + remainder
[ok]: BITOP NOT (empty string)
[ok]: BITOP NOT (known string)
[ok]: BITOP where dest and target are the same key
[ok]: BITOP AND|OR|XOR don't change the string with single input key
[ok]: BITOP missing key is considered a stream of zero
[ok]: BITOP shorter keys are zero-padded to the key with max length
[ok]: SORT regression for issue #19, sorting floats
[ok]: SORT with STORE returns zero if result is empty (github issue 224)
[ok]: SORT with STORE does not create empty lists (github issue 224)
[ok]: SORT with STORE removes key if result is empty (github issue 227)
[ok]: SORT with BY  and STORE should still order output
[ok]: SORT will complain with numerical sorting and bad doubles (1)
[ok]: SORT will complain with numerical sorting and bad doubles (2)
[ok]: SORT BY sub-sorts lexicographically if score is the same
[ok]: SORT GET with pattern ending with just -> does not get hash field
[ok]: SORT by nosort retains native order for lists
[ok]: SORT by nosort plus store retains native order for lists
[ok]: SORT by nosort with limit returns based on original list order
[ok]: SORT speed, 100 element list BY key, 100 times
[ok]: SORT speed, 100 element list BY hash field, 100 times
[ok]: SORT speed, 100 element list directly, 100 times
[ok]: SORT speed, 100 element list BY , 100 times
[ok]: AOF rewrite during write load
[19/36 done]: unit/scripting (4 seconds)
Testing unit/memefficiency
[20/36 done]: unit/sort (16 seconds)
Testing unit/hyperloglog
[ok]: Sync should have transferred keys from master
[ok]: The link status should be up
[ok]: SET on the master should immediately propagate
[ok]: FLUSHALL should replicate
[ok]: ROLE in master reports master with a slave
[ok]: ROLE in slave reports slave in connected state
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random)
[ok]: MIGRATE can correctly transfer large values
[ok]: BITOP and fuzzing
[ok]: MIGRATE can correctly transfer hashes
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru)
[ok]: Turning off AOF kills the background writing child if any
[ok]: Memory efficiency with values in range 32
[ok]: MIGRATE timeout actually works
[ok]: BITOP or fuzzing
[21/36 done]: unit/dump (7 seconds)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru)
[ok]: MASTER and SLAVE dataset should be identical after complex ops
[ok]: AOF rewrite of list with ziplist encoding, string data
[22/36 done]: integration/replication-2 (20 seconds)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random)
[ok]: AOF rewrite of list with linkedlist encoding, string data
[ok]: BITOP xor fuzzing
[ok]: Memory efficiency with values in range 64
[ok]: DEL all keys again (DB 0)
[ok]: DEL all keys again (DB 1)
[ok]: MOVE basic usage
[ok]: MOVE against key existing in the target DB
[ok]: MOVE against non-integer DB (#1428)
[ok]: MOVE can move key expire metadata as well
[ok]: MOVE does not create an expire if it does not exist
[ok]: SET/GET keys in different DBs
[ok]: MGET
[ok]: MGET against non existing key
[ok]: MGET against non-string key
[ok]: RANDOMKEY
[ok]: RANDOMKEY against empty DB
[ok]: RANDOMKEY regression 1
[ok]: GETSET (set new value)
[ok]: GETSET (replace old value)
[ok]: MSET base case
[ok]: MSET wrong number of args
[ok]: MSETNX with already existent key
[ok]: MSETNX with not existing keys
[ok]: STRLEN against non-existing key
[ok]: STRLEN against integer-encoded value
[ok]: STRLEN against plain string
[ok]: SETBIT against non-existing key
[ok]: SETBIT against string-encoded key
[ok]: SETBIT against integer-encoded key
[ok]: SETBIT against key with wrong type
[ok]: SETBIT with out of range bit offset
[ok]: SETBIT with non-bit argument
[ok]: BITOP NOT fuzzing
[ok]: BITOP with integer encoded source objects
[ok]: BITOP with non string source key
[ok]: BITOP with empty string after non empty string (issue #529)
[ok]: BITPOS bit=0 with empty key returns 0
[ok]: BITPOS bit=1 with empty key returns -1
[ok]: BITPOS bit=0 with string less than 1 word works
[ok]: BITPOS bit=1 with string less than 1 word works
[ok]: BITPOS bit=0 starting at unaligned address
[ok]: BITPOS bit=1 starting at unaligned address
[ok]: BITPOS bit=0 unaligned+full word+reminder
[ok]: BITPOS bit=1 unaligned+full word+reminder
[ok]: BITPOS bit=1 returns -1 if string is all 0 bits
[ok]: BITPOS bit=0 works with intervals
[ok]: BITPOS bit=1 works with intervals
[ok]: BITPOS bit=0 changes behavior if end is given
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl)
[ok]: AOF rewrite of list with ziplist encoding, int data
[ok]: BITPOS bit=1 fuzzy testing using SETBIT
[ok]: HyperLogLog self test passes
[ok]: PFADD without arguments creates an HLL value
[ok]: Approximated cardinality after creation is zero
[ok]: PFADD returns 1 when at least 1 reg was modified
[ok]: PFADD returns 0 when no reg was modified
[ok]: PFADD works with empty string (regression)
[ok]: PFCOUNT returns approximated cardinality of set
[ok]: SETBIT fuzzing
[ok]: GETBIT against non-existing key
[ok]: GETBIT against string-encoded key
[ok]: GETBIT against integer-encoded key
[ok]: SETRANGE against non-existing key
[ok]: SETRANGE against string-encoded key
[ok]: SETRANGE against integer-encoded key
[ok]: SETRANGE against key with wrong type
[ok]: SETRANGE with out of range offset
[ok]: GETRANGE against non-existing key
[ok]: GETRANGE against string value
[ok]: GETRANGE against integer-encoded value
[ok]: Test replication partial resync: no backlog (diskless: no, reconnect: 1)
[ok]: maxmemory - policy volatile-lru should only remove volatile keys.
[ok]: BITPOS bit=0 fuzzy testing using SETBIT
[23/36 done]: unit/bitops (9 seconds)
[ok]: AOF rewrite of list with linkedlist encoding, int data
[ok]: maxmemory - policy volatile-random should only remove volatile keys.
[ok]: Memory efficiency with values in range 128
[ok]: HyperLogLogs are promote from sparse to dense
[ok]: AOF rewrite of set with intset encoding, string data
[ok]: maxmemory - policy volatile-ttl should only remove volatile keys.
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[24/36 done]: unit/maxmemory (13 seconds)
[ok]: AOF rewrite of set with hashtable encoding, string data
[ok]: Memory efficiency with values in range 1024
[ok]: GETRANGE fuzzing
[ok]: Extended SET can detect syntax errors
[ok]: Extended SET NX option
[ok]: Extended SET XX option
[ok]: Extended SET EX option
[ok]: Extended SET PX option
[ok]: Extended SET using multiple options at once
[ok]: KEYS * two times with long key, Github issue #1208
[ok]: GETRANGE with huge ranges, Github issue #1844
[ok]: HyperLogLog sparse encoding stress test
[ok]: Corrupted sparse HyperLogLogs are detected: Additionl at tail
[ok]: Corrupted sparse HyperLogLogs are detected: Broken magic
[ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding
[ok]: Corrupted dense HyperLogLogs are detected: Wrong length
[ok]: PFADD, PFCOUNT, PFMERGE type checking works
[ok]: PFMERGE results on the cardinality of union of sets
[25/36 done]: unit/basic (27 seconds)
[ok]: AOF rewrite of set with intset encoding, int data
[ok]: AOF rewrite of set with hashtable encoding, int data
[ok]: FUZZ stresser with data model alpha
[ok]: Memory efficiency with values in range 16384
[ok]: AOF rewrite of hash with ziplist encoding, string data
[26/36 done]: unit/memefficiency (13 seconds)
[ok]: AOF rewrite of hash with hashtable encoding, string data
[ok]: AOF rewrite of hash with ziplist encoding, int data
[ok]: AOF rewrite of hash with hashtable encoding, int data
[ok]: AOF rewrite of zset with ziplist encoding, string data
[ok]: AOF rewrite of zset with skiplist encoding, string data
[ok]: Test replication partial resync: ok after delay (diskless: no, reconnect: 1)
[ok]: PFCOUNT multiple-keys merge returns cardinality of union
[ok]: AOF rewrite of zset with ziplist encoding, int data
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: AOF rewrite of zset with skiplist encoding, int data
[ok]: BGREWRITEAOF is delayed if BGSAVE is in progress
[ok]: BGREWRITEAOF is refused if already in progress
[27/36 done]: unit/aofrw (37 seconds)
[ok]: FUZZ stresser with data model compr
[ok]: PFDEBUG GETREG returns the HyperLogLog raw registers
[ok]: PFADD / PFCOUNT cache invalidation works
[28/36 done]: unit/hyperloglog (22 seconds)
[ok]: BGSAVE
[ok]: SELECT an out of range DB
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 1000 element sorted set - skiplist
[ok]: Replication: commands with many arguments (issue #1221)
[29/36 done]: integration/replication-4 (44 seconds)
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 1000 element sorted set - skiplist
[ok]: Connect multiple slaves at the same time (issue #141), diskless=no
[ok]: Test replication partial resync: backlog expired (diskless: no, reconnect: 1)
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 1000 element sorted set - skiplist
[ok]: Check consistency of different data types after a reload
[ok]: ZSETs skiplist implementation backlink consistency test - skiplist
[ok]: Same dataset digest if saving/reloading as AOF?
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: EXPIRES after a reload (snapshot + append only file rewrite)
[ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, reconnect: 0)
[ok]: ZSETs ZRANK augmented skip list stress testing - skiplist
[30/36 done]: unit/type/zset (51 seconds)
[ok]: EXPIRES after AOF reload (without rewrite)
[ok]: PIPELINING stresser (also a regression for the old epoll bug)
[ok]: APPEND basics
[ok]: APPEND basics, integer encoded values
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: APPEND fuzzing
[ok]: FLUSHDB
[ok]: Perform a final SAVE to leave a clean DB on disk
[31/36 done]: unit/other (56 seconds)
[ok]: Test replication partial resync: ok psync (diskless: yes, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Client output buffer hard limit is enforced
[ok]: MASTER and SLAVE consistency with expire
[ok]: First server should have role slave after SLAVEOF
[ok]: Test replication partial resync: no backlog (diskless: yes, reconnect: 1)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: MASTER and SLAVE consistency with EVALSHA replication
[32/36 done]: integration/replication-3 (82 seconds)
[ok]: ziplist implementation: value encoding and backlink
[ok]: Client output buffer soft limit is not enforced if time is not overreached
[ok]: Test replication partial resync: ok after delay (diskless: yes, reconnect: 1)
[ok]: ziplist implementation: encoding stress testing
[33/36 done]: unit/type/list-3 (93 seconds)
[ok]: Slave should be able to synchronize with the master
[ok]: Detect write load to master
[ok]: Connect multiple slaves at the same time (issue #141), diskless=yes
[ok]: Client output buffer soft limit is enforced if time is overreached
[34/36 done]: unit/obuf-limits (93 seconds)
[ok]: Test replication partial resync: backlog expired (diskless: yes, reconnect: 1)
[35/36 done]: integration/replication-psync (105 seconds)
[36/36 done]: integration/replication (109 seconds)

                   The End

Execution time of different units:
  0 seconds - unit/printver
  0 seconds - unit/quit
  0 seconds - unit/auth
  0 seconds - unit/scan
  1 seconds - unit/protocol
  2 seconds - unit/multi
  7 seconds - unit/type/hash
  9 seconds - unit/type/list-2
  10 seconds - unit/expire
  2 seconds - integration/rdb
  0 seconds - unit/pubsub
  5 seconds - integration/aof
  2 seconds - integration/convert-zipmap-hash-on-load
  12 seconds - unit/type/set
  2 seconds - unit/slowlog
  1 seconds - unit/introspection
  13 seconds - unit/type/list
  1 seconds - unit/limits
  4 seconds - unit/scripting
  16 seconds - unit/sort
  7 seconds - unit/dump
  20 seconds - integration/replication-2
  9 seconds - unit/bitops
  13 seconds - unit/maxmemory
  27 seconds - unit/basic
  13 seconds - unit/memefficiency
  37 seconds - unit/aofrw
  22 seconds - unit/hyperloglog
  44 seconds - integration/replication-4
  51 seconds - unit/type/zset
  56 seconds - unit/other
  82 seconds - integration/replication-3
  93 seconds - unit/type/list-3
  93 seconds - unit/obuf-limits
  105 seconds - integration/replication-psync
  109 seconds - integration/replication

\o/ All tests passed without errors!

Cleanup: may take some time... OK